Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Vas 5054a self diagnostic test sequence.
11-09-2019, 21:09 PM,
Post: #51
|
|||
|
|||
RE: Vas 5054a self diagnostic test sequence.
(31-08-2019, 07:44 AM)aka99 Wrote: anyone uses velospeed s patched 1.20.42 fw binary? Where did u see this bin file? For vasPC i think Fantomel put up one vmware already made. check his collection If you think i helped you please do take 1 second and press THANKS button
|
|||
11-09-2019, 21:30 PM,
Post: #52
|
|||
|
|||
RE: Vas 5054a self diagnostic test sequence.
|
|||
12-09-2019, 04:44 AM,
(This post was last modified: 12-09-2019, 14:29 PM by Clusters.)
Post: #53
|
|||
|
|||
RE: Vas 5054a self diagnostic test sequence.
Run the VAS PC, run a test, and verify the error. The following errors can occur:
700.2108 Problem with the K-line 700.2111 Problem with the L-line (possible cause: The VD14 diode is not sealed properly The sticker should be closer to the plug) 700.2113 Problem TJA1050 / TJA1040) 700.2114 Problem with CAN -High (fake, inverted or faulty TJA1054AT / TJA1055) 700.2115 problem with J1850 VPW (, inverted or faulty AU5780A / A5736 AU5780M) faulty OKI M6636, as inverted diode VD7) 700.2230 problem with 3702C (no signal KL15 ignition) possible treatment : - Short legs 2 and 4 on AU5780. - Short legs 20 and 21 on M6636. In TJA1054TA legs are 2 and 3. Short legs? Repeat the test in VAS-PC. Important Information: Errors are strictly related. They are not displayed at the same time, but after tests that are performed sequentially. |
|||
Reputation: +2 - Tadk [+1] , turp9 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content