Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Xentry splash screen appears then nothing
12-10-2017, 10:24 AM,
Post: #1
YTMercedes  Xentry splash screen appears then nothing
I've got an EVG7 DL46 that used to work with Windows XP and an older version of Xentry/DAS. The operating system started having issues on startup. I think someone installed a free antivirus software package that removed essential files for Windows/Xentry.

Anyway, I had to reinstall windows and DAS/Xentry. I do not know where the discs that came with the unit are (we've had it quite a long time, I believe it was a copy anyway). I installed windows XP and tried a Dll'd version of Xentry but due to the install instructions not relating to the download and missing files I could not complete the install. I then got a newer version of Xentry from this forum (many thanks) and tried to install it, only to find out it wouldn't run on WinXP. I then installed Windows 7 (after finding drivers for the thing) and Xentry. All good, I was then supplied with the starkey (again thanks to this forum). I have set up communication with the SDconnect C4 unit.

My problem is when I launch the Xentry program the initial splash screen appears but then it just quits and leaves me with only the desktop.

Would anyone know the reason for this? I don't know if the install has failed although everything seemed to install correctly, or the EVG just isn't up to running the newer operating system and software? I don't get any error messages or info of any kind.

Any help appreciated.
Quote this message in a reply
[+] 2 users say Thank You to Laminator for this post
14-10-2017, 02:34 AM,
Post: #2
RE: Xentry splash screen appears then nothing
You left out important details... such as which xentry version you installed, and what the date was set at on your computer.
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
16-10-2017, 08:37 AM,
Post: #3
RE: Xentry splash screen appears then nothing
Thanks for the reply.

The version I installed is - Xentry.OpenShell.XDOS.v15.12.5.2015.12

I installed it with the current date, I guess this was wrong?

The starkey is from 09/10/2017 to 09/10/2022.

If I change the date on the EVG to an earlier date eg, 2015 I then get a message saying 'No access authorization code...'

Should I uninstall Xentry, change the date on the EVG, install again, then try with the current code I have? Or a clean install again, and install Xentry with the date set at say 01/2016?
Quote this message in a reply
17-10-2017, 02:43 AM, (This post was last modified: 17-10-2017, 02:46 AM by Enabled.)
Post: #4
RE: Xentry splash screen appears then nothing
You need to set back your system time, and then redo your start key center license. If you don't have the correct license fix, then disable internet so you don't lose the key every time.

No reinstall needed.

You have to be aware that you have 2 separate issues.

1. Xentry 12.2015 is made to run for around 6 months (it may be more or less). After that, it will not boot Xentry.

2. Xentry and Startkeycenter check your license (fake from a keygen) against their database on the internet. If it's not legitimate, your license will be deleted.
Quote this message in a reply
[+] 4 users say Thank You to Enabled for this post
19-10-2017, 14:01 PM,
Post: #5
RE: Xentry splash screen appears then nothing
(12-10-2017, 10:24 AM)Laminator Wrote:  I've got an EVG7 DL46 that used to work with Windows XP and an older version of Xentry/DAS. The operating system started having issues on startup. I think someone installed a free antivirus software package that removed essential files for Windows/Xentry.

Anyway, I had to reinstall windows and DAS/Xentry. I do not know where the discs that came with the unit are (we've had it quite a long time, I believe it was a copy anyway). I installed windows XP and tried a Dll'd version of Xentry but due to the install instructions not relating to the download and missing files I could not complete the install. I then got a newer version of Xentry from this forum (many thanks) and tried to install it, only to find out it wouldn't run on WinXP. I then installed Windows 7 (after finding drivers for the thing) and Xentry. All good, I was then supplied with the starkey (again thanks to this forum). I have set up communication with the SDconnect C4 unit.

My problem is when I launch the Xentry program the initial splash screen appears but then it just quits and leaves me with only the desktop.

Would anyone know the reason for this? I don't know if the install has failed although everything seemed to install correctly, or the EVG just isn't up to running the newer operating system and software? I don't get any error messages or info of any kind.

Any help appreciated.


I ran into the same problem with XDOS 07.2017 I tried every possible fix no joy. I then reinstalled it worked fine after that.
Quote this message in a reply
[+] 3 users say Thank You to MOMOSAM for this post
19-10-2017, 15:01 PM,
Post: #6
RE: Xentry splash screen appears then nothing
(19-10-2017, 14:01 PM)MOMOSAM Wrote:  
(12-10-2017, 10:24 AM)Laminator Wrote:  I've got an EVG7 DL46 that used to work with Windows XP and an older version of Xentry/DAS. The operating system started having issues on startup. I think someone installed a free antivirus software package that removed essential files for Windows/Xentry.

Anyway, I had to reinstall windows and DAS/Xentry. I do not know where the discs that came with the unit are (we've had it quite a long time, I believe it was a copy anyway). I installed windows XP and tried a Dll'd version of Xentry but due to the install instructions not relating to the download and missing files I could not complete the install. I then got a newer version of Xentry from this forum (many thanks) and tried to install it, only to find out it wouldn't run on WinXP. I then installed Windows 7 (after finding drivers for the thing) and Xentry. All good, I was then supplied with the starkey (again thanks to this forum). I have set up communication with the SDconnect C4 unit.

My problem is when I launch the Xentry program the initial splash screen appears but then it just quits and leaves me with only the desktop.

Would anyone know the reason for this? I don't know if the install has failed although everything seemed to install correctly, or the EVG just isn't up to running the newer operating system and software? I don't get any error messages or info of any kind.

Any help appreciated.


I ran into the same problem with XDOS 07.2017 I tried every possible fix no joy. I then reinstalled it worked fine after that.

Use Glintwebs Xentry patcher, that has the neccessary fix for the 06m timeout issue.

yes

if not, there is this timeout fix ....

Xentry timeout fix

cheers.

Learning is good, SHARING is BETTER hi

If my post helps you, don't be shy, say thanks & rep ! yes
Quote this message in a reply
[+] 4 users say Thank You to taztheman for this post
24-06-2019, 19:53 PM,
Post: #7
RE: Xentry splash screen appears then nothing
i have same problem version3/2018 can any one help thanks
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
YTMercedes Xentry New Long Key (original key) 1st web free service pesona 1,584 147,898 26-03-2024, 20:25 PM
Last Post: Delphi2002
YTMercedes HHT-Win 64bit With Xentry XDOS 2023.03 One Click JackyTran 6 1,555 26-03-2024, 16:21 PM
Last Post: Djkalash
YTMercedes New 2024 xentry KG? Rik 8 1,276 26-03-2024, 11:47 AM
Last Post: ocostel
YTMercedes How to Install Xentry PassThru 03.2022 Flawlessly margut 1 1,623 23-03-2024, 15:29 PM
Last Post: head
YTMercedes Xentry Passthru 06.2023 J2534 Openport VCX + Keygen pitercie 2 462 23-03-2024, 15:29 PM
Last Post: head
  Xentry 2024.03 - PT & XDOS renia1983 19 2,079 17-03-2024, 19:35 PM
Last Post: gcs190
YTMercedes XENTRY DAS Activation Here takis 2,422 617,894 15-03-2024, 10:24 AM
Last Post: Mario68
  03 2024 Xentry Final version ross2018 9 895 14-03-2024, 23:37 PM
Last Post: connector
YTMercedes XENTRY AIO FULL FIX [2023.09-R2 & 2023.12-R2] [UPDATED 21/12/2023] crypt0ninja 153 30,387 06-03-2024, 17:32 PM
Last Post: db8000
  Xentry 09/12.2021 WIFI Solution gcs190 11 4,810 29-02-2024, 13:33 PM
Last Post: gcs190

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content