[bmwextra1]

Long story short....

Flooded car, someone monkey with it an make it run by swapping totally different parts till the car started:

modules that they throw at it till they got the car running are:
1. ZGW-High (metal box) - car came with ZWG2-4SK
2. JBBF and the entire fuse panel
3. SZL
4. FRM

All back to original modules, new from the dealer, minus the FRM module

When I`m plugging in the ZGW-02 8SK that I receive from the dealer (FA & vin coded & flex-ray initiate) the car looses EPS, TBX, and left & right headlights modules. If I`ll plug back the "monkey ZGW-High" EPS comes to life.

I did try to flash the ZWG but after SVT_soll and Tal calculation, the ZGW is not in the list. Only 7 or 8 modules are available for flashing

(using e-sys 2.81 & 3.30 & 3.31 with the latest psdz data)
Car is F10 build 08/2015, I-step factory F010-15-07-504.

[hojo29]

Which F10 is it exactly?
And has the F10 CIC or NBT?

[bmwextra1]

Car build is 08/2015 -> NBT

[hojo29]

Car build is 08/2015 -> NBT

And what exactly 520D, 530D ????
Which part number does ZGW have?

[zeronoo]

...
When I`m plugging in the ZGW-02 8SK that I receive from the dealer (FA & vin coded & flex-ray initiate) the car looses EPS, TBX, and left & right headlights modules. If I`ll plug back the "monkey ZGW-High" EPS comes to life.
...

for start, just reset flex ray and leave it, do not initiate, you will have all computers back...

[bmwextra1]

...
When I`m plugging in the ZGW-02 8SK that I receive from the dealer (FA & vin coded & flex-ray initiate) the car looses EPS, TBX, and left & right headlights modules. If I`ll plug back the "monkey ZGW-High" EPS comes to life.
...

for start, just reset flex ray and leave it, do not initiate, you will have all computers back...

I`ll try that and let you know,

It`a 528i 2016

---

Car build is 08/2015 -> NBT

And what exactly 520D, 530D ????
Which part number does ZGW have?

2016 528i (4cyl engine) 6135 9380323 - is the ZGW (that came with the car)

[bmwextra1]

Zeronoo

When I said "looses EPS module" I meant to say that the EPS doesn`t work anymore and ISTA/P is telling me to install it.