Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
NBT EVO Flash with 3.62.5
|
19-12-2017, 04:42 AM,
(This post was last modified: 19-12-2017, 04:43 AM by smilo.)
Post: #31
|
|||
|
|||
|
NBT EVO Flash with 3.62.5
So I have to import all FSC with Esys, then 120 to load on USB with ROAD Map Europe - Ok I will try tomorrow.
Thank you FYI, I’m also not able to code CAFD detected from FA. I tried everything by modifying FA date/VIN/VO/car model/.. without success |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
19-12-2017, 04:53 AM,
Post: #32
|
|||
|
|||
RE: NBT EVO Flash with 3.62.5
(19-12-2017, 04:42 AM)smilo Wrote: So I have to import all FSC with Esys, then 120 to load on USB with ROAD Map Europe - Ok I will try tomorrow. Correct (19-12-2017, 04:42 AM)smilo Wrote: FYI, I’m also not able to code CAFD detected from FA. I tried everything by modifying FA date/VIN/VO/car model/.. without success I don't know what is happening here. If FA is valid, and you still can't VO Code it, then I would flash it to ensure CAFD is compatible with NBT2 firmware. ![[Image: Rear-38-Percent.png]](https://i.ibb.co/xD0BGK0/Rear-38-Percent.png) ![[Image: 3-4-View-38-Percent.png]](https://i.ibb.co/NTVtk7N/3-4-View-38-Percent.png) ![[Image: Front-38-Percent.png]](https://i.ibb.co/xDd192G/Front-38-Percent.png) 2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|||
|
|
|
19-12-2017, 05:35 AM,
(This post was last modified: 19-12-2017, 05:35 AM by smilo.)
Post: #33
|
|||
|
|||
|
NBT EVO Flash with 3.62.5
At the end of the flash process (after all installed successfully: btld, swf, iba), in the step of CAFD deploy, I get an error.
|
|||
|
|
|
19-12-2017, 05:50 AM,
Post: #34
|
|||
|
|||
RE: NBT EVO Flash with 3.62.5
(19-12-2017, 05:35 AM)smilo Wrote: At the end of the flash process (after all installed successfully: btld, swf, iba), in the step of CAFD deploy, I get an error. What is the exact error? 2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant 2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE |
|||
|
|
|
19-12-2017, 06:53 AM,
Post: #35
|
|||
|
|||
|
RE: NBT EVO Flash with 3.62.5
Maybe stupid question, But are you flashing on bench with a zgw? What type of FA do you use(car series)?
|
|||
|
|
|
19-12-2017, 07:27 AM,
(This post was last modified: 19-12-2017, 07:27 AM by smilo.)
Post: #36
|
|||
|
|||
|
NBT EVO Flash with 3.62.5
Flashed on the car- F26 (I will try on the bench for the first time tomorrow, any advices are welcome).
Car serie on the FA: tried with F15 and F26. I will give you the exact error I get when coding the CAFD |
|||
|
|
|
20-12-2017, 04:25 AM,
Post: #37
|
|||
|
|||
|
RE: NBT EVO Flash with 3.62.5
This is the error when trying to code the detected CAFD:
Caf's suchen Tal wird generiert Abarbeitung wird gestartet Read SVT before TAL execution started. Read SVT before TAL execution finished. TAL execution started. VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197] ExecutionID=2017/12/20-03:57:47.558 [] prepareTALExecution started [PROGRESS] [] prepareTALExecution finished [PROGRESS] [] prepareVehicleForCoding started [PROGRESS] [] prepareVehicleForCoding finished [PROGRESS] MCDDiagService<id=46900, job=com.bmw.psdz.jobs.programming.zgw.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE] [HU_NBT2 - 63] prepareECUforCoding started [PROGRESS] [HU_NBT2 - 63] prepareECUforCoding finished [PROGRESS] [HU_NBT2 - 63] authenticateECUforCoding started [PROGRESS] [HU_NBT2 - 63] authenticateECUforCoding finished [PROGRESS] [HU_NBT2 - 63 - cafd_00001ef6-006_030_168] Transaction type: cdDeploy; Message: TA started [TRANSACTION] MCDDiagService<id=62649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : requestOutOfRange, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE] [] job failed with negative response error: code: service returned global negative response description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET severity: ERROR [THROWABLE] [HU_NBT2 - 63 - cafd_00001ef6-006_030_168] Transaction type: cdDeploy; Message: TA finished [TRANSACTION] [HU_NBT2 - 63] There was an error during TAL execution, please check the log files. [WARN] [HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error: code: service returned global negative response description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET severity: ERROR [HU_NBT2 - 63] finalizeECUCoding started [PROGRESS] [HU_NBT2 - 63] finalizeECUCoding finished [PROGRESS] [] There was an error, please check the log files. [WARN] [] - [Exception - HU_NBT2 - 63] job failed with negative response error: code: service returned global negative response description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET severity: ERROR [] finalizeVehicleCoding started [PROGRESS] [] finalizeVehicleCoding finished [PROGRESS] [] finalizeTALExecution started [PROGRESS] [] finalizeTALExecution finished [PROGRESS] TAL execution finished [TAL_EXECUTION_FINISHED] TAL-Execution finished with status: "FinishedWithError". [C207] TAL execution finished. Duration: "20s". [C206] Read SVT after TAL execution started. Read SVT after TAL execution finished. Abarbeitung beendet |
|||
|
|
|
20-12-2017, 06:05 AM,
Post: #38
|
|||
|
|||
RE: NBT EVO Flash with 3.62.5
(20-12-2017, 04:25 AM)smilo Wrote: This is the error when trying to code the detected CAFD: VIN/FA or other persistenz doesn't match the headunit. Please, Press the Buttons
![[Image: postbit_thx.gif]](http://cartechnology.co.uk/images/postbit_thx.gif) and ![[Image: postbit_reputation.gif]](http://cartechnology.co.uk/images/CarTechnologyTheCure/english/postbit_reputation.gif) if you feel that this post helped you! |
|||
|
|
|
20-12-2017, 23:20 PM,
Post: #39
|
|||
|
|||
RE: NBT EVO Flash with 3.62.5
(20-12-2017, 06:05 AM)Loliceman Wrote:(20-12-2017, 04:25 AM)smilo Wrote: This is the error when trying to code the detected CAFD: It could be due to HU component protection - that's what create the VIN mismatch ? Someone knows how to check reliably if a NBT2 is in component protection state ? must appear between errors in Tool32 FS_LESEN ? |
|||
|
|
|
02-01-2018, 09:05 AM,
Post: #40
|
|||
|
|||
NBT EVO Flash with 3.62.5
![[Image: bf67208dbb26073fa9533a732af4f7d5.jpg]](https://uploads.tapatalk-cdn.com/20180102/bf67208dbb26073fa9533a732af4f7d5.jpg) This is the component protection error if you check it with Tool32 |
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
