Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Cannot connect to car with icom next with latest pro launcher
14-10-2017, 19:27 PM,
Post: #1
Cannot connect to car with icom next with latest pro launcher
Hi guys,
Today I decided to update my esys and launcher because i was using esys 3.27.1 with launcher 2.7.1 and I needed to use the latest psdzdata to code a car that had a recent dealer update. I updated esys to 3.31 and launcher pro to 2.9.8. Since then I am unable to connect to any car using my icom next. I also updated the fw to the latest one. That didn’t help either. However if I use enet cable everything works fine. After that I uninstalled esys 3.31 and installed 3.28 and 3.27 but none of them seems to be working anymore with icom. Did anyone else experience similar issues?


Attached Files Thumbnail(s)
   

under Don’t forget to give Thanks & Rep if my post helped you!!!underthankyou
Quote this message in a reply
16-10-2017, 08:17 AM,
Post: #2
RE: Cannot connect to car with icom next with latest pro launcher
Nobody has an idea what it could be?

under Don’t forget to give Thanks & Rep if my post helped you!!!underthankyou
Quote this message in a reply
16-10-2017, 10:22 AM,
Post: #3
RE: Cannot connect to car with icom next with latest pro launcher
(16-10-2017, 08:17 AM)darthur90 Wrote:  Nobody has an idea what it could be?

Disconnect car battery for 15 minutes and then try again....
Quote this message in a reply
16-10-2017, 10:30 AM,
Post: #4
RE: Cannot connect to car with icom next with latest pro launcher
Did u lock the icom by itool radar?

If not try to unplug the Negative battery for about 5 min then plug it back.

Please hit Reputation button if u think my info is helpful.
Regards
Quote this message in a reply
16-10-2017, 10:57 AM,
Post: #5
RE: Cannot connect to car with icom next with latest pro launcher
Already tried both. no luck.

under Don’t forget to give Thanks & Rep if my post helped you!!!underthankyou
Quote this message in a reply
17-10-2017, 15:33 PM,
Post: #6
RE: Cannot connect to car with icom next with latest pro launcher
You have wrong ip for connection, you must detect the correct ip and change it on dialog box of esys


(16-10-2017, 10:57 AM)darthur90 Wrote:  Already tried both. no luck.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ESys Launcher PRO Setup 2.8.1 fengyonghua21 406 48,994 7 hours ago
Last Post: Pommie
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 105 35,955 17-04-2024, 18:36 PM
Last Post: hashtagmaster
  v.4.46.51_PSdZData_Lite *LATEST* Rob@BU 0 171 15-04-2024, 21:34 PM
Last Post: Rob@BU
XZBMW ICOM Firmware (NEXT & A2) always current! Vojno 206 43,186 12-04-2024, 23:36 PM
Last Post: bennymx
XZBMW Poor wifi signal from new ICOM's bmchicago 3 318 12-04-2024, 18:55 PM
Last Post: Node
  ISTA launcher console (v1.2.4.11 and up) Node 20 3,298 07-04-2024, 10:46 AM
Last Post: Joe2
  Solved ✔ ICOM NEXT Error bmwcare 4 2,484 01-04-2024, 11:34 AM
Last Post: ivanp
  CCC flash WINKFP ICOM BimmerSLO 9 366 29-03-2024, 19:17 PM
Last Post: Hoborg
  ISTA launcher problem Red_bean_bun 1 252 26-03-2024, 05:11 AM
Last Post: 2013m5
  For anyone having problem with ICOM NEXT FW update via ISTA+. ImmBoo 16 4,171 24-03-2024, 11:29 AM
Last Post: Twointje

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content