Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

AUDI R* Cluster change.
15-10-2017, 12:31 PM,
Post: #1
ZTAudi  AUDI R* Cluster change.
Guys
in the process of changing my audi r8 cluster fromt the early red illuminated type to the newer white illuminated type.
i understand its not plug and play and requires me to read the data of the one set and flash it onto the new set.
The cluster does have the micronas chip (3217G). I do have an xprog clone 5.60 which supports this chip. I have found the wiring diagram of the foum but states to use the twisted coax cable. my cable witht my xprog hasnt got one. is it a case of just still pining it the same with the cable i got?
Also do i need to read and then write just the micronas or is there anymore chips i need to read?

also the pcb does remove from the clock and plugs onto the new clocks display. could it be just the case of puttingb my old odometer pcb onto the new clocks as its only the illumination i require.

kind regards
anthony
Quote this message in a reply
15-10-2017, 18:03 PM,
Post: #2
RE: AUDI R* Cluster change.
(15-10-2017, 12:31 PM)laytonanthony Wrote:  Guys
in the process of changing my audi r8 cluster fromt the early red illuminated type to the newer white illuminated type.
i understand its not plug and play and requires me to read the data of the one set and flash it onto the new set.
The cluster does have the micronas chip (3217G). I do have an xprog clone 5.60 which supports this chip. I have found the wiring diagram of the foum but states to use the twisted coax cable. my cable witht my xprog hasnt got one. is it a case of just still pining it the same with the cable i got?
Also do i need to read and then write just the micronas or is there anymore chips i need to read?

also the pcb does remove from the clock and plugs onto the new clocks display. could it be just the case of puttingb my old odometer pcb onto the new clocks as its only the illumination i require.

kind regards
anthony

Xprog is for reading micronas and 24c32 eeprom and with special function you can change vin, mileage, pin but without other tools you can't edit mac, config, keys, cs...

I you have read out micronas and eeprom from old cluster and new cluster than post it here or send me pm than you get help

I changed a lot of cluster from a3 and tt which is same as r8 without any error like others tools
Quote this message in a reply
15-10-2017, 18:06 PM,
Post: #3
RE: AUDI R* Cluster change.
OK. Cluster turns up tomorrow so I'll first try and read the new cluster before I start messing with my working set.

So no way just to swap pcb onto the new clicks?
Kind regards
Anthony

Sent from my SM-N950F using Tapatalk
Quote this message in a reply
16-10-2017, 16:44 PM,
Post: #4
RE: AUDI R* Cluster change.
(15-10-2017, 18:06 PM)laytonanthony Wrote:  OK. Cluster turns up tomorrow so I'll first try and read the new cluster before I start messing with my working set.

So no way just to swap pcb onto the new clicks?
Kind regards
Anthony

Sent from my SM-N950F using Tapatalk

Do you think it's so easy only change pcb?
If yes than ask you the question why some develop tools like avdi, xprog, smok,...
Quote this message in a reply
16-10-2017, 16:47 PM, (This post was last modified: 16-10-2017, 16:52 PM by laytonanthony.)
Post: #5
RE: AUDI R* Cluster change.
No you don't understand. The pcb that contains the information clips onto the clocks. I'm only changing clocks for the newer illumination dials and lcd panel. Nothing more. So i was wondering if I put my old dash pcb onto the new clocks it could Be a straight swap. That make sense?

Sent from my SM-N950F using Tapatalk

Pic shows pcd which clips to the clocks... [Image: e3c7bea6adb7136ef872a16a30f7d35e.jpg][Image: 9b46db30a1024ec9eca18b9b74c484c7.jpg]

Sent from my SM-N950F using Tapatalk
Quote this message in a reply
18-10-2017, 22:59 PM,
Post: #6
RE: AUDI R* Cluster change.
Anyone, surley ?
Quote this message in a reply
21-02-2018, 10:24 AM,
Post: #7
RE: AUDI R* Cluster change.
Bump? some one must know? i dont want to lock my out lol
Quote this message in a reply
21-02-2018, 13:10 PM,
Post: #8
RE: AUDI R* Cluster change.
You can't swap any pcb between two clusters, it won't work.
I can help you, please send me the files of two clusters and I will configure new one for start your car.
You need to read 3217G Micronas + eeprom 24c32 for both clusters and send me.
Bests
Quote this message in a reply
21-02-2018, 14:17 PM,
Post: #9
RE: AUDI R* Cluster change.
(21-02-2018, 13:10 PM)paskuale Wrote:  You can't swap any pcb between two clusters, it won't work.
I can help you, please send me the files of two clusters and I will configure new one for start your car.
You need to read 3217G Micronas + eeprom 24c32 for both clusters and send me.
Bests

Hi mate
Thanks.
I've read the new cluster. I now just need to read my cluster out of my car.
What's your email address?
Kind regards
Anthony
Quote this message in a reply
21-02-2018, 20:00 PM,
Post: #10
RE: AUDI R* Cluster change.
Check your PM.
Bests
Quote this message in a reply
[+] 2 users say Thank You to paskuale for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Tiguan 2012 cluster clone. Possible? Maikiu 1 38 26-03-2024, 08:36 AM
Last Post: pepi
ZVW VW Virtual Cluster - looking for offline cluster clone EU (poldiag) spooky75 4 380 26-03-2024, 06:43 AM
Last Post: spacewalker
ZTAudi Audi A3 8P0 920 932 D - no ADress 25 (IMMO) chrisi1909 1 62 23-03-2024, 10:22 AM
Last Post: -Harry-
  W212 cluster renew passador83 7 140 23-03-2024, 07:04 AM
Last Post: passador83
XSMini Solved ✔ Mini Cluster 6211-6957297 - MC912DG128 (3K91D) Flash please urgi 1 52 22-03-2024, 15:13 PM
Last Post: urgi
  Please kmts edc17cp44 audi a5 pistolo30 1 53 17-03-2024, 19:50 PM
Last Post: tigre
XZBMW bmw gt f34 year 2014 change km help please manueldord 3 108 17-03-2024, 15:31 PM
Last Post: TKservice
ZTAudi Audi Q7 4M VC update avf130 0 46 16-03-2024, 16:57 PM
Last Post: avf130
  Audi A3 2004 - VDO DASH scheme & pinout w/o password Yhoni 0 67 14-03-2024, 19:41 PM
Last Post: Yhoni
  volvo xc90 language and miles change rapidtuning 1 59 13-03-2024, 16:05 PM
Last Post: TKservice

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content