Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Kess Ktag

  4. MOD FILES

  5. ProCarDiag

  6. ECU CHIPS

  7. NBE Files



Post Reply 
【Feedback】 CGDI PROG BenzMonster key tool support & feedback
17-11-2017, 09:31 AM
Post: #11
RE: CGDI PROG MB Benz key programmer
(17-11-2017 09:20 AM)obdtool Wrote:  
(17-11-2017 06:51 AM)perso69 Wrote:  2007 w221 from Japan: Add key on bench
First try i use vvdi
But 2 time upload also failed cannot get pass
So i was change device Cgdi from vvdi
1 time upload successful
Good and very fast 10min got pass
for vvdi failure, pls data acquisition again,then upload the new data to server.

Tried 2 time and failed. It is enough to do with the same tool.
CGDI first upload get PSW

No THANKS + REP, no HELP!!!
Find all posts by this user
Quote this message in a reply
19-11-2017, 09:21 AM
Post: #12
RE: CGDI PROG MB Benz key programmer
From Spanish collegue:
W204 2010 add key on bench: 15mn all done

Tested by me: CGDI with W209 moto key
Experience: Add key on bench using Moto key (051), failed

So for now, CGDI did not support Moto key.

No THANKS + REP, no HELP!!!
Reputation: +1 - ROD-BENDERS [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: ROD-BENDERS , sqlkarol , JarsaR
19-11-2017, 09:41 AM
Post: #13
RE: CGDI PROG MB Benz key programmer
I think I will get one of these nerd

Tight lines and bending rods are what makes my day biggrin
Find all posts by this user
Quote this message in a reply
 Thanks given by: perso69
19-11-2017, 22:39 PM (This post was last modified: 19-11-2017 22:42 PM by perso69.)
Post: #14
RE: CGDI PROG MB Benz key programmer
(19-11-2017 09:41 AM)ROD-BENDERS Wrote:  I think I will get one of these nerd

Before bying this tool, one thing you need to know that technican support is very very bad.
We need almost exploring function ourself.

Here is the video above expérience with Moto key
https://www.youtube.com/watch?v=3aXtt5nf...e=youtu.be

No THANKS + REP, no HELP!!!
Reputation: +1 - ROD-BENDERS [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: ROD-BENDERS , JarsaR , ucokseparoh
19-11-2017, 22:53 PM
Post: #15
RE: CGDI PROG MB Benz key programmer
(19-11-2017 22:39 PM)perso69 Wrote:  
(19-11-2017 09:41 AM)ROD-BENDERS Wrote:  I think I will get one of these nerd

Before bying this tool, one thing you need to know that technican support is very very bad.
We need almost exploring function ourself.

Here is the video above expérience with Moto key
https://www.youtube.com/watch?v=3aXtt5nf...e=youtu.be

Yeah for the price i am prepared to go with it and see for myself thumbsup

Tight lines and bending rods are what makes my day biggrin
Reputation: +1 - perso69 [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: perso69 , JarsaR , bara001
20-11-2017, 07:42 AM
Post: #16
RE: CGDI PROG MB Benz key programmer
Compared with vvdi mb tool, cgdi mb prog win in price and speed
Find all posts by this user
Quote this message in a reply
20-11-2017, 08:46 AM
Post: #17
RE: CGDI PROG MB Benz key programmer
(20-11-2017 07:42 AM)Giuseppe Mark Wrote:  Compared with vvdi mb tool, cgdi mb prog win in price and speed

I don't have other tool to compare, but many collegues report that it work good and fast.

Just done spare for Benz G500 year 2000 imported from Dubai. EZS 203, collect data is long about 17mn. All done in 25mn. But big problem with BE key, Only one can start and remote don't work. Finally write NEC original key.


Attached File(s) Thumbnail(s)
               

No THANKS + REP, no HELP!!!
Reputation: +1 - ROD-BENDERS [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: ROD-BENDERS , JarsaR
21-11-2017, 03:04 AM
Post: #18
RE: CGDI PROG MB Benz key programmer
(20-11-2017 08:46 AM)perso69 Wrote:  
(20-11-2017 07:42 AM)Giuseppe Mark Wrote:  Compared with vvdi mb tool, cgdi mb prog win in price and speed

I don't have other tool to compare, but many collegues report that it work good and fast.

Just done spare for Benz G500 year 2000 imported from Dubai. EZS 203, collect data is long about 17mn. All done in 25mn. But big problem with BE key, Only one can start and remote don't work. Finally write NEC original key.


yes, cgdi mb prog really fast, it is fastest key programmer to add benz keys and calculate the password at present.
Find all posts by this user
Quote this message in a reply
21-11-2017, 06:55 AM
Post: #19
RE: CGDI PROG MB Benz key programmer
Can anyone clear up what happens after 6 months do online passwords ?

How much we have to pay each time after 6 months ?

gavel

Tight lines and bending rods are what makes my day biggrin
Find all posts by this user
Quote this message in a reply
21-11-2017, 22:31 PM (This post was last modified: 22-11-2017 01:30 AM by perso69.)
Post: #20
RE: CGDI PROG MB Benz key programmer
(21-11-2017 06:55 AM)ROD-BENDERS Wrote:  Can anyone clear up what happens after 6 months do online passwords ?

How much we have to pay each time after 6 months ?

gavel


After 6 months, each months is 10$ with 2 FREE PSW calculation/day
If you need more PSW calculation so:
8$ for 30, 16$ for 60 times.

Many user report that bug came from software 2.0.0.0. When they do all key lost W204 207.

This bug did not exist in software 1.5.

Sprinter W906 2010 report:

Adding key succes by user on Sprinter W906 2010 with BGA key

Key add on car by OBD

ALso W210 add key on bench with NEC key: Succes.


Attached File(s) Thumbnail(s)
       

No THANKS + REP, no HELP!!!
Reputation: +1 - ROD-BENDERS [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: ROD-BENDERS , JarsaR
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
0Immo Xhorse vvdi2 tool Technical Support & Feedback in volavka 101 15,887 Today 13:28 PM
Last Post: raffy haddad
  Help to choose right tool in proel123 1 82 15-01-2018 23:09 PM
Last Post: stvesc3
0Immo LATEST IMMO SERVICE TOOL 1.2 - 2017 in volavka 200 22,352 11-01-2018 09:03 AM
Last Post: Balyanchic
0Immo VVDI PROG Support/Feedback Thread in Czozen 154 8,835 11-01-2018 03:15 AM
Last Post: Xhorsesupport
  FVDI Feedback / questions and answers in klostazy 260 16,433 09-01-2018 16:27 PM
Last Post: jansmerfowski
  Key Master/Key Master DP FEEDBACK in mar.wo 1 114 09-01-2018 12:20 PM
Last Post: mar.wo
0Engine What tool to read dumps in Blinkston 2 136 07-01-2018 20:40 PM
Last Post: 205xad
0Immo IMMO Universal Decoding 4.5 Feedback! in volavka 2 974 30-12-2017 23:04 PM
Last Post: hollymay
XZBMW Autohex II Technical Support & Feedback in volavka 243 48,977 24-12-2017 00:43 AM
Last Post: oficialusis
0Immo Xhorse vvdi BGA MB tool Technical Support & Feedback in volavka 136 30,734 23-12-2017 06:49 AM
Last Post: Xhorsesupport

Forum Jump:


User(s) browsing this thread:
hackmich, 3 Guest(s)

Return to TopReturn to Content