Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
EDC17c42 virgin & coding
|
25-10-2017, 09:48 AM,
(This post was last modified: 25-10-2017, 09:57 AM by Gabriel130592.)
Post: #1
|
|||
|
|||
|
EDC17c42 virgin & coding
Hello! I need help with this car.
Opel Vivaro ph3 2014. ECU bosch edc17c42 (0281019840) (hw 1039s64343) The ORIGINAL ECU is damaged. The control unit does not connect in diagnosis and can not be read by BDM tricore. I bought an ECU with the same SW and HW, but it is from Renault Traffic. I need to know if I can virginize the ECU and code it with OP-COM 2014. Or if someone can make me the file already prepared to work. Any help will be appreciated. Thanks in advance. Regards Does the ECU have any eeprom? or is it internal to the micro? If so, does anyone know what it is? Greetings and thanks |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
25-10-2017, 11:18 AM,
Post: #2
|
|||
|
|||
RE: EDC17c42 virgin & coding
(25-10-2017, 09:48 AM)Gabriel130592 Wrote: Hello! I need help with this car. Read dump from new ecu ![[Image: OxNUyuy.jpg]](https://i.imgur.com/OxNUyuy.jpg) All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need. |
|||
| Reputation: +2 - CHIKODIAG [+1] , Gabriel130592 [+1] | |||
|
|
|
25-10-2017, 17:55 PM,
Post: #3
|
|||
|
|||
|
RE: EDC17c42 virgin & coding
I have the ECU tomorrow
with the virgin file you can code it with OPCOM? sorry for my bad English  Regards |
|||
|
|
|
26-10-2017, 23:56 PM,
(This post was last modified: 27-10-2017, 00:11 AM by Gabriel130592.)
Post: #4
|
|||
|
|||
|
RE: EDC17c42 virgin & coding
Hello!
attached reading of the newly purchased exchange and information of the vehicle in which it is to be installed .. I have been testing the VauxCom 2014 on the car with the new switchboard connected, and in programming, only the function of code injectors appears. no coding uch, dashboard, single injectors and keys. If you can make me a virgin file, what machine do I need to encode it? Is it possible to change the pin? Thanks in advance regards |