Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Vin of atm
27-10-2017, 22:14 PM,
Post: #1
|
|||
|
|||
Vin of atm
Hi
I recently got an used atm. I have flashed it and coded it to my car vin before checking what is the original vin of the car the atm came from. Is there a way to know what is the original vin of the atm? I tried using tool32 job atm.prg but seems to be nothing there. Maybe using the iccid can someone check with bmw? Please help!! Sent from my iPhone using Tapatalk if you feel that I have in some way contributed / helped solve your issues/problems/requests, please do not forget to press thanks or rep button. Much appreciated.
|
|||
27-10-2017, 22:59 PM,
Post: #2
|
|||
|
|||
RE: Vin of atm
What do you need for that?
|
|||
27-10-2017, 23:08 PM,
Post: #3
|
|||
|
|||
RE: Vin of atm
(27-10-2017, 22:59 PM)leo04 Wrote: What do you need for that? i have bought an fsc set for the nbt evo that is retrofitted. when i connect atm and nbt evo to same can line, i think it checks the vin of evo and cancels the fsc. if i disconnect atm, i do not get this. hence i think i will flash and match vin of atm for the evo as well. if you feel that I have in some way contributed / helped solve your issues/problems/requests, please do not forget to press thanks or rep button. Much appreciated.
|
|||
28-10-2017, 10:48 AM,
Post: #4
|
|||
|
|||
RE: Vin of atm
(27-10-2017, 23:08 PM)tcp443 Wrote:please read and post errors from NBTEVO(27-10-2017, 22:59 PM)leo04 Wrote: What do you need for that? NBTEVO, ENAV2, MGU - CP OFF, Navi , APPS , Carplay, AA
MGU ID-8-9-10 Cars - Full Region change NCD Secure Coding 2.0 |
|||
28-10-2017, 22:09 PM,
Post: #5
|
|||
|
|||
RE: Vin of atm
You try cps_lesen via toolset32?
|
|||
28-10-2017, 22:17 PM,
Post: #6
|
|||
|
|||
RE: Vin of atm
Error about component protection
NBTEVO, ENAV2, MGU - CP OFF, Navi , APPS , Carplay, AA
MGU ID-8-9-10 Cars - Full Region change NCD Secure Coding 2.0 |
|||
28-10-2017, 22:22 PM,
Post: #7
|
|||
|
|||
RE: Vin of atm
Ok
a another question.. can here somewhere soldering the chip from oem tcb and install this on atm? |
|||
29-10-2017, 00:02 AM,
(This post was last modified: 29-10-2017, 00:07 AM by tcp443.)
Post: #8
|
|||
|
|||
RE: Vin of atm
(28-10-2017, 22:09 PM)Emmy Wrote: You try cps_lesen via toolset32? hi cps lesen already shows the new vin i flashed and encoded. i should have done the cps lesen before doing any programming or encoding. stupid me. (28-10-2017, 10:48 AM)BugFix Wrote:(27-10-2017, 23:08 PM)tcp443 Wrote:please read and post errors from NBTEVO(27-10-2017, 22:59 PM)leo04 Wrote: What do you need for that? the errors doesn't seem to indicate anything. E R R O R M E M O R Y --------------------------------------- Date: 29.10.2017, 08:05:15 JobStatus: OKAY Variant: NBTEVO.PRG Version: 14.000 ------------------------------------------------------------- RESULT: 15 error in error memory ! ------------------------------------------------------------- 0xB7F8CD Verbindung HU zum Antennenverstärker - Leitungsunterbrechung FM2-Antenne Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 CD 2F ------------------------------------------------------------- 0xB7F85A Verbindung HU zum Antennenverstärker - Leitungsunterbrechung FM1-Antenne Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 5A 2F ------------------------------------------------------------- 0xB7F842 FBAS-Eingang 2: kein Video- oder Sync-Signal vorhanden Testbedingungen erfüllt Fehler gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is an event DTC. This ecu is NOT RESPONSIBLE for this error entry (DTC). (E.g. wrong or missing network information.) Error code: B7 F8 42 68 ------------------------------------------------------------- 0xB7F84D Verbindung Head-Unit zum Mikrophon 1: Leitungsunterbrechung Testbedingungen erfüllt Fehler momentan nicht vorhanden, aber bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 4D 28 ------------------------------------------------------------- 0xB7F850 Verbindung Head-Unit zum Mikrophon 2: Leitungsunterbrechung Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 50 2F ------------------------------------------------------------- 0xE1C444 MOST: Ring wacht nicht auf Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is an event DTC. This ecu is NOT RESPONSIBLE for this error entry (DTC). (E.g. wrong or missing network information.) Error code: E1 C4 44 2F ------------------------------------------------------------- 0xE1C468 BODY-CAN Control Module Bus OFF Testbedingungen erfüllt Fehler gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: E1 C4 68 68 ------------------------------------------------------------- 0xB7F8B8 Verbindung Head-Unit zum Bluetooth-Antennenfuß: Leitungsunterbrechung Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 B8 2F ------------------------------------------------------------- 0xB7F8C3 CID meldet sich nicht (Hardware-Fehler: Ausfall CID-Kommunikation) Testbedingungen erfüllt Fehler momentan nicht vorhanden, aber bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 C3 28 ------------------------------------------------------------- 0xB7F8CA CID-Variante nicht kompatibel (Konfigurations-Fehler: CID-Variante nicht kompatibel) Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 CA 2F ------------------------------------------------------------- 0xB7F8CB Bilddaten ungültig oder fehlerhaft Testbedingungen erfüllt Fehler momentan nicht vorhanden, aber bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 CB 28 ------------------------------------------------------------- 0xB7F81A Verbindung Head-Unit zur WLAN-Antenne: Leitungsunterbrechung Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 1A 2F ------------------------------------------------------------- 0xE1C603 Ethernet: Kommunikationsfehler (Link-Abbruch) durch Steuergeräte-Reset Testbedingungen erfüllt Fehler gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is an event DTC. This ecu is NOT RESPONSIBLE for this error entry (DTC). (E.g. wrong or missing network information.) Error code: E1 C6 03 68 ------------------------------------------------------------- 0xB7F8F6 HDCP: Authentifizierung fehlgeschlagen Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is an event DTC. This ecu is NOT RESPONSIBLE for this error entry (DTC). (E.g. wrong or missing network information.) Error code: B7 F8 F6 2F ------------------------------------------------------------- 0xB7F87D unbekannter Fehlerort Testbedingungen erfüllt Fehler momentan vorhanden und bereits gespeichert Fehler würde kein Aufleuchten einer Warnlampe verursachen This is no event DTC. This ecu IS RESPONSIBLE for this error entry. Error code: B7 F8 7D 2F ============================================================= currently all these setup is on bench if you feel that I have in some way contributed / helped solve your issues/problems/requests, please do not forget to press thanks or rep button. Much appreciated.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content