Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Icom next not detected in iTool Radar
01-11-2017, 13:03 PM,
Post: #1
|
|||
|
|||
Icom next not detected in iTool Radar
Hi everyone,
I have some troubles using ICOM since few days , it's not detected by iToolRadar. Impossible to connect to it from browser, and impossible to know which IP@ to use to communicate with it (I had changed the standard IP@, now neither original IP@ nor the one I gave work) LED System is green, sometimes flashing green, LAN LED is green when ethernet connected. Nothing special more. I tried restoring but, it seems correctly proceededbut nothing changed. This is the restore txt generated: Builddate 2014-04-17 16:25 => Updating boot image 1 => Updating app image 1 tar: can't open 'BUILDDATE': Cannot allocate memory => Resetting u-boot parameters 00:01:A9:00:EE:E9 Current Mac: 00:01:A9:00:EE:E9 Serialnumber: 1120134 Write mac: 00:01:A9:00:EE:E9 => Cleaning up /config... => Set restore.bin counter... ERROR 352: IncCnt [36] Open failed: No such file or directory => Setting flags Success (EEPROM) Success (EEPROM) Success (EEPROM) Success (EEPROM) Success (EEPROM) Success (EEPROM) => Done. Success (ATMEL) => DONE Please, any idea ? |
|||
01-11-2017, 13:09 PM,
Post: #2
|
|||
|
|||
RE: Icom next not detected in iTool Radar
Apart from your problem you do not have ICOM NEXT, just a cheap A1 clone in NEXT alike housing.
Flash died, common. Replace with new one (128 or 256MB prefferably) |
|||
01-11-2017, 15:32 PM,
Post: #3
|
|||
|
|||
RE: Icom next not detected in iTool Radar
Odd , is this the icom restore bin file bmw ? had similar problem but after restore I manually update firmware and I use static Ip's on all my stuff ,hope this helps
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content