Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA-P (3.63.0.400) - MEGA
05-11-2017, 11:14 AM,
Post: #11
|
|||
|
|||
RE: ISTA-P (3.63.0.400) - MEGA
|
|||
05-11-2017, 11:16 AM,
Post: #12
|
|||
|
|||
RE: ISTA-P (3.63.0.400) - MEGA
|
|||
05-11-2017, 11:38 AM,
Post: #13
|
|||
|
|||
RE: ISTA-P (3.63.0.400) - MEGA
Install ISTA-P from the mentioned link and Launch it with Beemerboys ISTA-P Launcher (in this forum) thats all...
|
|||
05-11-2017, 11:53 AM,
Post: #14
|
|||
|
|||
RE: ISTA-P (3.63.0.400) - MEGA
Hi,
@cowboy: That was my question, where can i find a standalone-version from ISTA-P? @snypertje: Two weeks ago i coded an E90 with ista-p (trailer hitch), works fine. @munich Simon: Sure, i know, but the problem from @atomantmk was, that he only has 110gb space free, and ista-p needs 244gb free space fro installation; then @almaretto answers "use standalone version". I dont know a standalone-version from ISTA-P, similar to ISTA-D. Is this better described now? regards, harry regards, harry |
|||
05-11-2017, 12:25 PM,
(This post was last modified: 05-11-2017, 12:28 PM by Node.)
Post: #15
|
|||
|
|||
RE: ISTA-P (3.63.0.400) - MEGA
I remember "standalone" ISTA-Ps were on torrents for some old versions. They are basically copies of folders taken from the installed version. Then you just paste them to your computer at standard locations and use beemerboy88's launcher.
You can still make your own "standalone" ISTA-P by installing it to a computer which has more disk space and then copy to the computer with insufficient disk space. Just be sure to uninstall old version first, else it will be a mess and you will never be able to uninstall them. You also need to take into account that ISTA-P creates multiple temporary folders/files for each session and they may take some considerable amount of disk space. I would not risk using ISTA-P on a computer which has less than 10-20Gb of space left after pasting such "standalone" version. |
|||
05-11-2017, 13:43 PM,
Post: #16
|
|||
|
|||
RE: ISTA-P (3.63.0.400) - MEGA
(05-11-2017, 11:14 AM)snypertje Wrote:(05-11-2017, 11:03 AM)harry015 Wrote: Hi, Using beemerboy88's loader, the omitted series can still be processed. I tested an F55 with ista/p 3.62.5 yesterday with no problems. |
|||
05-11-2017, 14:16 PM,
Post: #17
|
|||
|
|||
RE: ISTA-P (3.63.0.400) - MEGA
From ISTA/P version 3.62.0 on (end of June 2017), the programming of the F, G, I series with ISTA/P will be gradually switched off.
Model series affected: F, G, I series vehicles. Series F056 can no longer be dealt with as of ISTA/P 3.62.1. Series I001, F001, F025, S15A, S15C can no longer be dealt with as of ISTA/P 3.63.0. |
|||
05-11-2017, 16:01 PM,
Post: #18
|
|||
|
|||
ISTA-P (3.63.0.400) - MEGA
With only 150GB free on my hard drive I have installed 3.63.0 over 3.62.5.
I think that I have seen that only 137GB is enough for dirty install. Gesendet von meinem HTC 10 mit Tapatalk NBT EVO Apple CarPlay Full Screen, Navigation, Video in Motion, SSH, CP
EntryNav EVO Apple CarPlay, Navigation, CP, SSH, full FSC Pack BMW FSC Retrofit CIC/NBT/EVO 8HP ISN Reset F Series Remote Remote VAG Navigation Update, Apple CarPlay and Android Auto Programming and Coding |
|||
05-11-2017, 16:55 PM,
(This post was last modified: 05-11-2017, 16:55 PM by ruben_17non.)
Post: #19
|
|||
|
|||
RE: ISTA-P (3.63.0.400) - MEGA
(05-11-2017, 14:16 PM)snypertje Wrote: From ISTA/P version 3.62.0 on (end of June 2017), the programming of the F, G, I series with ISTA/P will be gradually switched off. yes, i also read this. but remain all data for these model, only M013 is not in istap. almost for take psdzdata like for esys have all data, only in ilevel F056 not is updated, but have updated data in psdzdata is extrange for I001, F001, F025, S15A, S15C i look all ok in istap 3.63 Please, Press the Buttons and if This post help or is usefull for you! Not is needed write just only thanks in Threads
|
|||
05-11-2017, 18:27 PM,
Post: #20
|
|||
|
|||
RE: ISTA-P (3.63.0.400) - MEGA
Hi,
the question was not, is it usefull to use ista-p, or which models cant be dealt with ista/p. The question is, what is the standalone version from ista-p, because the installation of ista-p 3.63 needs 244gb free space on hdd... @atomantmk: how did you install 3.63 with only 150gb? The installer would not continue... regards, harry |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content