Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-P (3.63.0.400) - MEGA
21-11-2017, 21:36 PM, (This post was last modified: 21-11-2017, 21:38 PM by CarlosF11.)
Post: #51
RE: ISTA-P (3.63.0.400) - MEGA
(21-11-2017, 21:30 PM)shawnsheridan Wrote:  
(21-11-2017, 21:16 PM)CarlosF11 Wrote:  
(21-11-2017, 20:57 PM)shawnsheridan Wrote:  
(21-11-2017, 20:55 PM)CarlosF11 Wrote:  Shawn,

This link isn’t working anymore? Any chance to revive it?

dontknow MEGA Link in Ppst #1 works fine.

Hmmm.. I’m getting broken link messages on most files, especially the rar-files.

dontknow

I just spot-checked 3 parts, and all download fine:

[Image: Image_002.png]

Thanks for checking Shawn, seems to be a problem on my side then.

(21-11-2017, 21:32 PM)atomantmk Wrote:  
(21-11-2017, 21:16 PM)CarlosF11 Wrote:  Hmmm.. I’m getting broken link messages on most files, especially the rar-files.
Because you are trying to download with Mega Downloader 1.7, try with JDownloader or with MEGA SYNC Extension to your browser.

I’m always downloading using my Synology Diskstation (NAS), never had a problem with it. Will look into other software, thanks.
Quote this message in a reply
29-11-2017, 10:56 AM, (This post was last modified: 10-12-2017, 22:25 PM by Stromag.)
Post: #52
RE: ISTA-P (3.63.0.400) - MEGA
EDIT: Problem Found
Quote this message in a reply
10-12-2017, 22:24 PM, (This post was last modified: 10-12-2017, 22:47 PM by Stromag.)
Post: #53
RE: ISTA-P (3.63.0.400) - MEGA
Hello I have installed the basic package of Ista-P 3.63.0 and as far as all right.
But if I make the update to 3.63.1, I get an error message.
So if I do not edit the application.xml for the Loader V6.1F and leave the value distributionVersion = "63.0.400" and then do the update, I get the error "Unknown".
If I edit the application.xml for the Loader V6.1F to distributionVersion = "3.63.0.400" then I get the error "25000" which beasagt that the program Ista-P can not be found.
Ista -P is also not under "Programs and Features", for example, to uninstall it.
Can someone help me with the mistakes and say what the problem is?
Quote this message in a reply
11-12-2017, 02:48 AM,
Post: #54
RE: ISTA-P (3.63.0.400) - MEGA
(10-12-2017, 22:24 PM)Stromag Wrote:  Hello I have installed the basic package of Ista-P 3.63.0 and as far as all right.
But if I make the update to 3.63.1, I get an error message.
So if I do not edit the application.xml for the Loader V6.1F and leave the value distributionVersion = "63.0.400" and then do the update, I get the error "Unknown".
If I edit the application.xml for the Loader V6.1F to distributionVersion = "3.63.0.400" then I get the error "25000" which beasagt that the program Ista-P can not be found.
Ista -P is also not under "Programs and Features", for example, to uninstall it.
Can someone help me with the mistakes and say what the problem is?
You have installed Standalone version from torrent and because of that you can't install higher version.
Download from here installation files and be sure that you have 240GB free space on your HDD, no space no installation.

Gesendet von meinem SM-T585 mit Tapatalk

NBT EVO Apple CarPlay Full Screen, Navigation, Video in Motion, SSH, CP
EntryNav EVO Apple CarPlay, Navigation, CP, SSH, full FSC Pack
BMW FSC Retrofit CIC/NBT/EVO
8HP ISN Reset F Series Remote
Remote VAG Navigation Update, Apple CarPlay and Android Auto
Programming and Coding
Quote this message in a reply
11-12-2017, 05:45 AM,
Post: #55
RE: ISTA-P (3.63.0.400) - MEGA
(11-12-2017, 02:48 AM)atomantmk Wrote:  
(10-12-2017, 22:24 PM)Stromag Wrote:  Hello I have installed the basic package of Ista-P 3.63.0 and as far as all right.
But if I make the update to 3.63.1, I get an error message.
So if I do not edit the application.xml for the Loader V6.1F and leave the value distributionVersion = "63.0.400" and then do the update, I get the error "Unknown".
If I edit the application.xml for the Loader V6.1F to distributionVersion = "3.63.0.400" then I get the error "25000" which beasagt that the program Ista-P can not be found.
Ista -P is also not under "Programs and Features", for example, to uninstall it.
Can someone help me with the mistakes and say what the problem is?
You have installed Standalone version from torrent and because of that you can't install higher version.
Download from here installation files and be sure that you have 240GB free space on your HDD, no space no installation.

Gesendet von meinem SM-T585 mit Tapatalk

Yes, it is a standalone.
I already had the update installed on the standalone from 3.63.0 to 3.63.1 but then I uninstalled everything again and deleted it and cleaned Regestry because I wanted to rebuild the PC.
So it went, but not now why I wanted to know where the error lies.
And there are still over 300gb of free memory available.
Quote this message in a reply
14-12-2017, 07:45 AM,
Post: #56
RE: ISTA-P (3.63.0.400) - MEGA
So it was done and everything worked.
Ista P installed Standalone 63.0 and then made update to 63.1 and then to 63.2 ..
Quote this message in a reply
16-12-2017, 06:29 AM,
Post: #57
RE: ISTA-P (3.63.0.400) - MEGA
Hi

Many thanks for the download.

Would it work with a enet cable?
Quote this message in a reply
16-12-2017, 07:51 AM,
Post: #58
RE: ISTA-P (3.63.0.400) - MEGA
(16-12-2017, 06:29 AM)vdiag Wrote:  Hi

Many thanks for the download.

Would it work with a enet cable?

Not for E-series nor ideal, but yes.


Quote this message in a reply
16-12-2017, 20:38 PM,
Post: #59
RE: ISTA-P (3.63.0.400) - MEGA
(16-12-2017, 07:51 AM)Almaretto Wrote:  
(16-12-2017, 06:29 AM)vdiag Wrote:  Hi

Many thanks for the download.

Would it work with a enet cable?

Not for E-series nor ideal, but yes.

Have tried with loader 6.1f and clicked the enet option put the ip address in then selected bmw for cars nothing loads?

With loader 6.3 there is no enet option. But the program loads?
Quote this message in a reply
16-12-2017, 21:55 PM, (This post was last modified: 16-12-2017, 22:08 PM by Stromag.)
Post: #60
RE: ISTA-P (3.63.0.400) - MEGA
(16-12-2017, 20:38 PM)vdiag Wrote:  
(16-12-2017, 07:51 AM)Almaretto Wrote:  
(16-12-2017, 06:29 AM)vdiag Wrote:  Hi

Many thanks for the download.

Would it work with a enet cable?

Not for E-series nor ideal, but yes.

Have tried with loader 6.1f and clicked the enet option put the ip address in then selected bmw for cars nothing loads?

With loader 6.3 there is no enet option. But the program loads?

6.3L only for ICOM..

6.1F Solution:
Open the installation folder of ISTA-P and locate the "application.xml" file and open it with the editor.

Change the value
"distributionVersion =" 63.x.xxx "
to the value
"distributionVersion =" 3.63.x.xxx "
Then it will work
Quote this message in a reply
[+] 2 users say Thank You to Stromag for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 33 2,988 4 hours ago
Last Post: Siki78
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,648 627,602 6 hours ago
Last Post: Sedoy
  ista for use whit vcx se db8000 0 36 9 hours ago
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 354 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,319 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,456 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW |ON MEGA| /// ALL ROAD MAPS EUROPE -> 2024 NEW + *KEY-TOOLS* hashtagmaster 206 66,012 27-03-2024, 08:22 AM
Last Post: hashtagmaster
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,760 27-03-2024, 05:59 AM
Last Post: hashtagmaster
XZBMW PSdZData 4.46.31 Full (MEGA) charlesjyw 0 130 26-03-2024, 18:07 PM
Last Post: charlesjyw
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 125 26-03-2024, 12:09 PM
Last Post: hlip

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content