[rickynguyen]

T

Go to "TAL calculation" => Load FA from 2012/07 or above F10/F11 => Read ECU, save it as SVT_IST.xml =>Edit this, change the line "Basevariant" from ZGW to ZGW2, save => load this SVT_IST.xml under "KIS target" => now calculate TAL and you should see ZGW wants a flash

Followed this, zgw flashed successfully but nothing changed, still see ZGW when read SVT from car.
Any help ?

[jadleb]

FA-FZAuftrag-Type- Typschlusse=YE21 .  Zeitkriterium=1112  

ZGW(CIC)                                              
BTLD_00000452_002_014_010
HWFL_000001B4_000_195_002
SWFL_00000453_002_014_030
SWFL_00000454_002_011_007

ZGW2(NBT)
BTLD_000010F5_003_004_090
HWEL_000010FC_000_194_000
SWFL_0000092B_009_017_000
SWFL_000010F6_003_004_160


BTLD_00000452_002_014_010  change  BTLD_000010F5_003_004_090
SWFL_00000453_002_014_030 change  SWFL_0000092B_009_017_000
SWFL_00000454_002_011_007 change  SWFL_000010F6_003_004_160

can you post please the BTLD SWFL for
ZGW2(CIC)

[Haug530d]

Go to "TAL calculation" => Load FA from 2012/07 or above F10/F11 => Read ECU, save it as SVT_IST.xml =>Edit this, change the line "Basevariant" from ZGW to ZGW2, save => load this SVT_IST.xml under "KIS target" => now calculate TAL and you should see ZGW wants a flash

I'm trying to bench flash a ZGW 02 mid to 4sk this way, i have read the ecu from the ZGW and changed the zeikreterium from 0911 (i think it was) to 0712.

Saved the FA and loaded it up in E-Sys 3.30.1

Following the rest of your guide, but the ZGW2 (10) under SVT remains all black on the BTLD,HWEL and the 2 SWFL files.

What could i be doing wrong here?

[Willi]

To be safe use ZK 1112.
Read ECU und calc SVT Soll with I-level-Shipment 12-11-502.

[user_530d]

To be safe use ZK 1112.
Read ECU und calc SVT Soll with I-level-Shipment 12-11-502.

ZK 0712 is enough. Important is SVT edit Basevariant ZGW to ZGW2
... ZGW-02 is not a ZGW2