Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J
07-11-2017, 15:29 PM,
(This post was last modified: 22-11-2017, 16:11 PM by benyclaudiu.)
Post: #1
|
|||
|
|||
ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J
ORIGINAL AUDI RMC NAVIGATION SD CARD SAT NAV MAP 2016 8X0 919 884 J
CID sudo ./mmc64 prog_cid /dev/mmcblk0 094150415544492002108649f6010300 sudo ./mmc32 prog_cid /dev/mmcblk0 094150415544492002108649f6010300 1 - Card EVO + (I tried 32G and 64G SD) 2 - FAT32 formatted card (in Windows) and copy navpsf_update in rrot (corrected) 3 - Install Ubuntu 32/64 (64's what I used) 4 - Copy local (Desktop linux) folder MMC 5 - open the copied folder and right cick -> "open terminal" 6 - check with the command execution rights "ll". You must have attributes besides "r", "w" and a "x". If there is an X writes: "chmod 777 mmc32" linux if you have 32 or "chmod 777 mmc64" if you have linux 64. And the rights and check the "ll" 7 - Insert the SD slot. Terminal command "df" and verify the name card. Somewhere down everything must occur "mmcblk0" + p + a number. The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0". CID To read the original SD: cat / sys / block / mmcblk0 / device / cid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 8 - Order To change CID terminal: - Linux 32 sudo ./mmc32 prog_cid /dev/mmcblk0 094150415544492002108649f6010300 - Linux 64 sudo ./mmc32 prog_cid /dev/mmcblk0 094150415544492002108649f6010300 After this command will display: Writing new CID: sudo ./mmc32 prog_cid /dev/mmcblk0 094150415544492002108649f6010300 Success! Remove and Reinsert SD card to check new CID. These files do not contain the activation code, if someone has the activation code it can climb it here. |