Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ ISTA: No flashing possible due to not connected power cord to the notebook
05-11-2017, 11:47 AM, (This post was last modified: 07-11-2017, 21:46 PM by Clusters.)
Post: #1
ZSkoda  ISTA: No flashing possible due to not connected power cord to the notebook
Hi,

since I have moved from VM to physical Hardware (High Performance Notebook with 10 Hours Battery Power). Now I have the problem that ISTA is not allowing flashing due to not connected power source to the notebook. In VM it was now problem because ISTA detected it as Workstation.

Has anybody an Idea how I can prevent ISTA to check if the Notebook is connected to a powercord? Or to change the OS to behave like a Workstation?

OS is newest Build 1709 Windows 10
HW is Lenovo T470s Notebook

Thanks in advance!
Quote this message in a reply
05-11-2017, 16:04 PM, (This post was last modified: 05-11-2017, 16:45 PM by unbrick.)
Post: #2
RE: ISTA: No flashing possible due to not connected power cord to the notebook
Can you post the exact error message you see, preferably from the logs?

edit: try adding this setting to IstaGui.exe.config (or the equivalent in the registry)

<add key="BMW.Rheingold.RheingoldSessionController.CircumventProgramingProhibition" value="true" />

I think this setting also allows you to flash over WLAN if you're feeling wreckless.

If you want to override the KL30 check, without hooking into EDIABAS or changing any dlls, use this setting, substituting your desired voltage (the value chosen is the default):

<add key="BMW.Rheingold.Clamp30.Voltage.Min.Warning.Pb" value="12.35" />
Reputation: +5 - BMWzone [+1] , ruben_17non [+1] , M-Simon [+1] , jaramillo [+1] , Loliceman [+1]
Quote this message in a reply
[+] 10 users say Thank You to unbrick for this post
05-11-2017, 17:31 PM,
Post: #3
RE: ISTA: No flashing possible due to not connected power cord to the notebook
Thank you very much. I was not able to find any hint in the logfile (they are countless)
I will check your keys later or tomorrow and will report back on this place.
Quote this message in a reply
07-11-2017, 18:42 PM, (This post was last modified: 07-11-2017, 18:54 PM by M-Simon.)
Post: #4
RE: ISTA: No flashing possible due to not connected power cord to the notebook
Hi,

I want to confirm that the mentioned key

<add key="BMW.Rheingold.RheingoldSessionController.CircumventProgramingProhibition" value="true" />)

has solved my problem finaly.

Thanks again!
Quote this message in a reply
[+] 4 users say Thank You to M-Simon for this post
06-12-2017, 19:42 PM,
Post: #5
RE: ISTA: No flashing possible due to not connected power cord to the notebook
Also to note for anyone programming laptop or desktop you should change power setting to never sleep all option never sleep and hard disk never turn off , if if goes to sleep bad things will happen !

hope this helps all
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  ista 4.46 Standalone kiranabc 33 3,044 9 hours ago
Last Post: Siki78
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,648 627,718 11 hours ago
Last Post: Sedoy
  ista for use whit vcx se db8000 0 38 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 360 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,351 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,479 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 127 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 165 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 669 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,503 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content