[RReader]

ICOM A2 clone lowers the voltage by 0.3V
ICOM A1 has the same voltage as the terminals are in this respect better,
Voltage drops also have an effect,
- thin long cables cause a voltage drop of about 35mm2
, weak handles in the terminals under the mask also reduce the voltage
I set the power supply to 14.8V and at the terminal I have 14.6V at high power consumption
  (60A) drops to 14V and at 100A drops to 13V

Thanks for sharing these information , may I know is there a document or note regarding that the 13.8 V is a little to low in charging battery of F-series from BMW ?

also , may I know what is your battery charger ? a constant 100A output ? that sure is powerful , thanks .


RReader