Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Increased battery discharge while connected to power source!!
19-11-2017, 21:37 PM,
(This post was last modified: 19-11-2017, 21:38 PM by DNK76.)
Post: #20
|
|||
|
|||
RE: Increased battery discharge while connected to power source!!
Charging the AGM battery
constant tension U = 14.5V to 14.8V maximum starting current 0.25 C (battery capacity) 20 hours and 4 hours 0.025C (battery capacity) 90AH x025 = 22.5A The problem is charging the battery with a constant current without voltage limitation in the so-called fast chargers the current can not exceed 0.1C, setting greater than 14.9V will damage the AGM battery The battery in the BSD system is charged only up to 60-80% of the capacity because they have to take charge of the energy when charging, with the system of energy recovery from braking, please read ist, setting of 14.5V -14.8V will never damage the AGM battery The charging current will be reduced to very low values I've seen a current of about 2A with ignition off on a weak battery and never before connected probably the charger for programming maybe at ASO, Generally, diagnostics and programming do not take more than 3-5 hours 13.6V-13.8V is the limit voltage only for voltage sustain With a low battery, you may see a low battery warning message and turn off the KL15 which happened to me at 13.8V, The instruction states that the charger must not be connected to the extreme discharge battery, As a rechargeable battery, it is not possible to charge more than 0.25C of battery capacity As for the usual battery it writes to not exceed 14.2V If my post helped you hit the thanks and reputation button!
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
4 Guest(s)
4 Guest(s)
Return to TopReturn to Content