[BMWScoops55]

Lookup options fitted under VIN

[bmwlover]

Checked by vin and I see 0212 NATIONAL BRAKE SYSTEM EQUIPMENT. So I need smaller ones yes?
I thought that needed bigger ones which are better.

[bmwcare]

Checked by vin and I see 0212 NATIONAL BRAKE SYSTEM EQUIPMENT. So I need smaller ones yes?
I thought that needed bigger ones which are better.

What is your VIN?
I'll give you all details you need

---

Got your PM
======
Your front pads are:
BMW 34 11 6 791 514
Textar 2417201
Jurid 573317J
Ate 13.0460-7239.2

Your front wear sensor is:
BMW 34 35 6 792 568
Ate 24.8190-0291.2
Textar 98043400

Your front disks are:
BMW 34 11 6 886 481 (which are 365x36mm)
Ate 24.0136-0109.1
Textar 92161005
Zimmermann 150.3449.20

======
If it was my vehicle I would use:
Textar Pads, Ate Disks, Ate Wear Sensor.

[bmwlover]

Thank you. Car stops very good, have great brake distance. I thought that there was the best brake system. 365 disks are the same as on e70 and e60 yes? My car stops better than e70. I had e70 50i before.

[bmwcare]

Thank you. Car stops very good, have great brake distance. I thought that there was the best brake system. 365 disks are the same as on e70 and e60 yes? My car stops better than e70. I had e70 50i before.

This is what the disk is used on.
BUT BEAR IN MIND IT IS ONLY FOR CERTAIN VO OPTIONS FOR EACH MODEL

Ate_ApplicationInfo.pdf
File Type:
Downloaded:	10 times
Size:	246.49 KB

---

Read this thread thoroughly including links if you're fitting yourself. You don't have a composite disk but it is important.

Bedding Procedure.txt
File Type:
Downloaded:	10 times
Size:	59 bytes

---

Actually, I'd revise my opinion, I'd use Zimmermann disks. They appear to be OE for your application.

---

Zimmermann Info

Zimmermann_ApplicationInfo.pdf
File Type:
Downloaded:	6 times
Size:	216.79 KB