Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Bsi control johnson planted with my fvdi clone
18-11-2017, 21:43 PM,
Post: #1
PPeugeot  Bsi control johnson planted with my fvdi clone
Hello
i have a problem with my bsi control johnson planted with my fvdi clone
96 668 955 80 02
BSI 04 EV K03-00 250910
I am looking for a solution for the recovered
thank you
Quote this message in a reply
18-11-2017, 22:39 PM,
Post: #2
RE: Bsi control johnson planted with my fvdi clone
(18-11-2017, 21:43 PM)eros770 Wrote:  Hello
i have a problem with my bsi control johnson planted with my fvdi clone
96 668 955 80 02
BSI 04 EV K03-00 250910
I am looking for a solution for the recovered
thank you
I have a similar clone. As with most coding and in depth diagnostics you should keep the voltage of the vehicle at the recommended voltage throughout the procedure. What happens the BSI goes into a mode which I can't remember the term for but the result is probably what's caused your current problem. If you search on the fly or fvdi website there is instruction of similar incidents it is not the fault of the tool but our inexperience in its use. A stabalised supply from China costs about 300 gbp and needs to be 80 to 100 amps at least especially on many of the German vehicles If you worked for a dealership that paid £30K for software the training side of thing's would have enabled you to avoid the problem. The procedure described on the manufacturers website I obtained the info from advises to connect another RUNNING vehicle to the vehicle under coding or otherwise. This is just a cost effective means of obtaining a stabalised voltage via the other vehicles alternator.
I'm sure it details the recovery procedure of your Johnson BSI. You may have to reset the BSI by the standard BSI methods which are detailed on various areas on the Web after you get things alive again to get everything functioning as normal.
I believe quite a few sellers independent of FVDI that sell the clone advise against its use on psa vehicles when reading pin codes, processes which involve eprom reading etc but I have experimented with a pug that had a BSI which was in need of replacement using the method. I connected stout jump leads to the vehicle at the recommended jump lead positions ( ie not across the batteries) started the other vehicle and proceeded to read the pin code with ease. The vehicle restarted and ran with no ill effects at all. So with a bit of patience you should be able to recover your unit. Even with in depth diagnosis it's safest to use voltage stabaliser ion.
Hope this gets you out of trouble see FVDI website re what it can and can't do

Regard
Colin



Sent from my SM-N910F using Tapatalk
Quote this message in a reply
18-11-2017, 23:36 PM,
Post: #3
RE: Bsi control johnson planted with my fvdi clone
(18-11-2017, 21:43 PM)eros770 Wrote:  Hello
i have a problem with my bsi control johnson planted with my fvdi clone
96 668 955 80 02
BSI 04 EV K03-00 250910
I am looking for a solution for the recovered
thank you

hi I think you need to reflash again the bsi
here is the link for bsi flash files also from members faced your problem by FVDI
hope I help you
http://cartechnology.co.uk/showthread.php?tid=27788
Quote this message in a reply
19-11-2017, 04:08 AM,
Post: #4
RE: Bsi control johnson planted with my fvdi clone
Try disconnect the battery for some time (make sure you have any radio codes etc)

Good luck

cheers

[Image: OxNUyuy.jpg]All VAG immo off or transfer - change Power Class up to & including WFS6 SHE -VAG DCM 6.2 3.7 - immo off also Bcm2, Elv, TC DSG DL381 DQ200 DQ250 DQ400 DQ500: Here:
AKL MQB - + A6-A7-A8-Touareg- generate sync key file - Many tools available = VAG ME7x LC AL NLS offline MOD tool + kg- BMW EDC16 IMMO TOOL + KG - BMW EWS remover tool + KG - med17 immo v2.3 - BMW-LAND ROVER-MINI EWS OFF TOOL + many more sw: PM me with what you need.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi VAG Simos 8.32 immo off or clone ahmadarifai 7 131 Today, 07:56 AM
Last Post: ahmadarifai
  Solved ✔ Med 17.1 clone - transfer immo bboctavian 4 201 17-03-2024, 15:45 PM
Last Post: bboctavian
  Audi A5 SIMOS 12.1 ecu clone or immo off immokill 1 72 14-03-2024, 17:43 PM
Last Post: jokir
  Solved ✔ Clone BSI siemens E01-00 SOLVED r0my81 3 366 11-03-2024, 11:05 AM
Last Post: r0my81
  Solved ✔ SID807evo PSA Clone JorBo 1 72 10-03-2024, 10:35 AM
Last Post: JorBo
ZVW Solved ✔ PCR2.1 clone MirzaF20 5 249 06-03-2024, 18:40 PM
Last Post: MirzaF20
XZBMW Solved ✔ E39 DME clone TomSab 6 852 05-03-2024, 06:00 AM
Last Post: TomSab
  EDC17C49 VRIGIN/CLONE Buszkin 0 63 27-02-2024, 08:10 AM
Last Post: Buszkin
  IMMO O CLONE EDC17C60 PSA jeam 5 182 26-02-2024, 09:36 AM
Last Post: Ecu_Blast
  Control Files CAS2 BS68 0 76 25-02-2024, 18:41 PM
Last Post: BS68

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content