Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F20 XenonDynamic FEM the lamp is not lit
20-11-2017, 19:04 PM,
Post: #1
|
|||
|
|||
F20 XenonDynamic FEM the lamp is not lit
Hello
I bought bmw f20 2014r. Lamp is not lit (xenon dynamic). I suspect that the FEM module was listed in this car. Can I re-encode even if the FEM module has a different vin? So far I have not dealt with series F and esys. |
|||
12-02-2018, 19:59 PM,
Post: #2
|
|||
|
|||
RE: F20 XenonDynamic FEM the lamp is not lit
(20-11-2017, 19:04 PM)onliest Wrote: Hello Yes you can re-code. beware of something read ECU instead of SVT. and dont worry about other Vin, as soon as you flash FEM it will connect to your vin. (in simple words) |
|||
12-02-2018, 21:56 PM,
(This post was last modified: 12-02-2018, 21:56 PM by torchia.)
Post: #3
|
|||
|
|||
RE: F20 XenonDynamic FEM the lamp is not lit
Have you tried to swap bulbs first?
|
|||
13-02-2018, 07:02 AM,
Post: #4
|
|||
|
|||
RE: F20 XenonDynamic FEM the lamp is not lit
(12-02-2018, 19:59 PM)icetuto Wrote:(20-11-2017, 19:04 PM)onliest Wrote: Hello Well. Not quite as easy. FEM is also the immobilizer and is matched to specific car keys. So engine start will not work. But to check lights. Yes. Also remember if used FEM has higher mileage than the car, it will automatically write the higher milage to the car. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content