[dave1982]

Hello,
i'm looking for someone who can readout or change the pin from my dashboard dump.
when i look in eeprom menu it shows FFFF.
and i'm not able to program it.

Try resetting then program you using opcom to program ?

i-m using opcom.
its not possible to reset.
when i try to reset, it ask for the pin.
its not possible to enter FFFF.
and then i try to enter my original pin it shows "Reset failed"

Your Op-Com can also read the pin code so double check as i told you in my first post.also check the security lock time it must be activated as you have put wrong pin codes few times so, live the ignition ON for the time showing in your Op-Com....

Can tell us what is the problem with this vehicle.........?

the problem is that the car wont start it shows the "F" in dash
in eeprom menu from opcom the dash pin is "FFFF"
its not possible to reset or program the dash.

i also have a small problem with the BCM.
programming and coding works without problems, but i have fault code:
B3058 - (0) Vehicle ID Not Programmed - Present
have tried to programm it in other car (Corsa C) and it works without faultcode.
but then i reset it and programm it in my meriva the fault code came back.