[domelec]

Could some kind soul remove dpf and egr from this file (tune it too if you want but no worries if you dont want to) for me without asking for payment

this is my brothers car and i removed the dpf and egr with the 2017.5 software and now car goes into limp mode and after number of miles the coil light flashes (second time now this happened)
i reset the flashing light with opcom first time.
not that often i ask for anything like this but the cars doing mine and my brothers heads in, i thought the software was suposed to be working good as feedback posts on many forums say its working on this ecu ok etc
but seems its not
thanks.
the car is a zafira b 120hp 8valve 1.9cdti z19dt with edc16c9 ecu
the file i read with ktag


think i sorted it guys sorry
decided to copy the contents from the file jpperformance did to the full flash then did checksums with winols and car is running again now
just waiting for brother to ring me when he gets home
cheers all

[Remap Ross]

I will do ,it might be a day or 2 as am over the head

for you i will do free

unless some one else does quicker

[domelec]

Thanks mate your a star

[semihmutcali]

Here is your request. Test and report it please

[domelec]

Sorry the file was only part read didnt realize i posted wrong 1
now updated the first post with full file
could some please redo the egr/dpf off please as i have the car sat on drive now and wont start after trying to flash the above file
it got to 100% then crashed with writing error

[ROD-BENDERS]

Could some kind soul remove dpf and egr from this file (tune it too if you want but no worries if you dont want to) for me without asking for payment

this is my brothers car and i removed the dpf and egr with the 2017.5 software and now car goes into limp mode and after number of miles the coil light flashes (second time now this happened)
i reset the flashing light with opcom first time.
not that often i ask for anything like this but the cars doing mine and my brothers heads in, i thought the software was suposed to be working good as feedback posts on many forums say its working on this ecu ok etc
but seems its not
thanks.
the car is a zafira b 120hp 8valve 1.9cdti z19dt with edc16c9 ecu
the file i read with ktag

Try this file Dom

one without checks (let tool do it)

other with

[domelec]

Cheers mate but hes now gone home

i edited the contents from a file given to the full read with hexeditor
then checksumed the file in winols
and all seems ok

did a regen etc first tho too