Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

G11/12 CID
03-12-2017, 15:22 PM,
Post: #1
XZBMW  G11/12 CID
G11/12 10.25" CID on the bench with NBT EVO. Can't get the display to work, i've tried every permutation of coding but still got the dreaded 'NO SIGNAL '. I have also tried different voltage range. Any ideas any one read
Quote this message in a reply
03-12-2017, 21:56 PM,
Post: #2
RE: G11/12 CID
Any one with a 7 series CAF (HU_NBT_EVO) CAFD_ i can view/compare Please
Quote this message in a reply
03-12-2017, 23:23 PM,
Post: #3
RE: G11/12 CID
You can generate one with ESys - use coding verification

Email: [email protected]  Skype: [email protected]
HU Engineering Tool
MGU Engineering Tool - now with field update mode via Feature Installer.
Coding 2.0
Quote this message in a reply
[+] 2 users say Thank You to pshoey for this post
04-12-2017, 09:05 AM,
Post: #4
G11/12 CID
I can give you coding from G11 if you need, but later (after few days). But you can get this with esys.


Sent from my iPhone using Tapatalk

BMW Coding Programming Retrofitting
Mercedes Benz Coding Retrofitting
Online help by TeamViewer
CID Changeable SD cards! 100% working!
Quote this message in a reply
[+] 2 users say Thank You to kmodel99 for this post
04-12-2017, 20:34 PM,
Post: #5
RE: G11/12 CID
Thanks for the replies, i will try to generate one with e-sys. kmodel99, that would be greatly appreciated. Thanks again
Quote this message in a reply
04-12-2017, 22:50 PM,
Post: #6
RE: G11/12 CID
Sorry i'm an ignoramus (newbie) i don't know how to generate one

Any one want to buy a brand new G11/12 CID
Quote this message in a reply
11-12-2017, 22:06 PM,
Post: #7
RE: G11/12 CID
One last question, then i'm going to put the screen on fleabay, why the HELL will an EVO id5 work and a EVO id4 not work with this screen ?. Please anybody, this is taking over my life, i cannot sleep at night.
Quote this message in a reply


Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content