[Silva1337]

Hello just bought e92 with pd 2007,06
which should have frm2
so i find another one frm3 ,puted module in car
flashed my vin coded, everything seems working except high/low beams , angel eyes , and when im closing windows it wont close fully (lift such in all coupe)

[kklobo]

You use empty man in ncs expert?
And fist of all for what you change to frm3? is needed only for lci headlights. Correct my if i'm wrong

[dazuc]

Maybe you flashed wrong zb.
Try to code blank man in ncs

[Chriz]

If you got pre lci halogen lights there are some issues with some FRM3 Modules (exept MAX BROSE)
or with LCI Halogen retrofits... the high beams wont works than.

for the windows code frm correct and try to re initialze the windows

[Freddy1]

Which FRM3 exactly did you get? XE, LED, AHL MAX KUEStER?

[Silva1337]

I resolved my issue everything is working now counter of short circuit was to high anyway and i didnt have proggrammer for reflashing on table so i bought frm2 and did all the job still dont know why im getting error with index frm_87 when trying to reset short circuit maybe daten to new? I have experienced this before with datens