Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help with ODIS-E and S systems
06-01-2018, 10:08 AM,
Post: #21
|
|||
|
|||
RE: Help with ODIS-E and S systems
Hey ATC, i have ODIS-S v4.2.3 and ODIS-E v7.2.2 on one Laptop Win7 x86. works good
|
|||
06-01-2018, 11:00 AM,
Post: #22
|
|||
|
|||
RE: Help with ODIS-E and S systems
(06-01-2018, 09:33 AM)ATC Wrote: Hi. Win7 Ultimate x86 Both works good in 1 laptop. The only think is that S 4.2.3 has newer PDU API (1.20.41) then E 7.2.2 (1.20.40) So if you use ODIS-E and then you run ODIS-S ,is takes little while (few seconds) until VAS50054a will be detected by ODIS ,because the firmware od VAS must be upgraded ,but this is done automatically and you don't even see this. |
|||
31-01-2019, 06:13 AM,
Post: #23
|
|||
|
|||
RE: Help with ODIS-E and S systems
I had the same error. It seems to be licensing issue. Follow this tutorial I found on another thread and you should be fine if you have all the correct files:
https://www.youtube.com/watch?v=T4BhALON6oA |
|||
31-01-2019, 11:20 AM,
Post: #24
|
|||
|
|||
RE: Help with ODIS-E and S systems
I have other error during installation, ODIS-S 5.0.6 installer can't install PDU API and cancel whole installation. Somebody have similar problem?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content