Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ F Series ISTA connection issues
12-12-2017, 14:41 PM,
(This post was last modified: 16-12-2017, 23:53 PM by Clusters.)
Post: #1
|
|||
|
|||
F Series ISTA connection issues
I have a F25 X3 to which I am trying to connect it to ISTA for diagnostics. The ENET cable I know works because it connects to E-SYS just fine for coding.
The ISTA program i have works fine as I use it when connecting to my E90 via a DCAN cable. So I have changed the setting to ENET as shown here; I then click on READ OUT VEHICLE DATA and then SETUP CONNECTION So ISTA does actually find my car as it shows the VIN, etc But then it struggles to identify the vehicle. What am i doing wrong? Any ideas for a fix? Thanks |
|||
12-12-2017, 14:56 PM,
Post: #2
|
|||
|
|||
RE: F Series ISTA connection issues
(12-12-2017, 14:41 PM)330d Wrote: I have a F25 X3 to which I am trying to connect it to ISTA for diagnostics. The ENET cable I know works because it connects to E-SYS just fine for coding. Have you tried "Ediabas Standard Settings" as Interface? It works fine for me with ENET on my F25 |
|||
12-12-2017, 15:45 PM,
(This post was last modified: 12-12-2017, 15:46 PM by Bimmer540.)
Post: #3
|
|||
|
|||
RE: F Series ISTA connection issues
You must use "Ediabas Standard Settings" with Enet-cable and use Ediabasconfigurator to connect to Enet.
|
|||
12-12-2017, 17:00 PM,
Post: #4
|
|||
|
|||
RE: F Series ISTA connection issues
@330d:
your edibas.ini is messed up. Try the one attached. |