[330d]

I have a F25 X3 to which I am trying to connect it to ISTA for diagnostics. The ENET cable I know works because it connects to E-SYS just fine for coding.

The ISTA program i have works fine as I use it when connecting to my E90 via a DCAN cable.

So I have changed the setting to ENET as shown here;



I then click on READ OUT VEHICLE DATA and then SETUP CONNECTION



So ISTA does actually find my car as it shows the VIN, etc



But then it struggles to identify the vehicle.



What am i doing wrong? Any ideas for a fix?

Thanks

[wenhantho]

I have a F25 X3 to which I am trying to connect it to ISTA for diagnostics. The ENET cable I know works because it connects to E-SYS just fine for coding.

The ISTA program i have works fine as I use it when connecting to my E90 via a DCAN cable.

So I have changed the setting to ENET as shown here;



I then click on READ OUT VEHICLE DATA and then SETUP CONNECTION



So ISTA does actually find my car as it shows the VIN, etc



But then it struggles to identify the vehicle.



What am i doing wrong? Any ideas for a fix?

Thanks

Have you tried "Ediabas Standard Settings" as Interface? It works fine for me with ENET on my F25

[Bimmer540]

You must use "Ediabas Standard Settings" with Enet-cable and use Ediabasconfigurator to connect to Enet.

[lagunasec]

@330d:
your edibas.ini is messed up.
Try the one attached.

[georgia55]

With Ediabas Configurator 2.0 is very easy to create a EDIABAS.INI no matter STD: OBD or ENET

[DNK76]

I use it for enet
the last ENET connection
HO-ICOM/ENET direct connection
then you choose ENET and you have a connection
without the intermediation of EDIABAS

[inspi1981]

There is 2 option.
1-HO-ICOM/ENET direct connection, You can check connection via ZGW search-You will see IP, VIN, etc-then Your network adapter is setup correctly and connection is fine

2-Ediabas Standard Settings, EDIABAS.ini must setup for using with ENET

[willisodhiambo]

I use it for enet
the last ENET connection
HO-ICOM/ENET direct connection
then you choose ENET and you have a connection
without the intermediation of EDIABAS

Aha, never thought of that method!

[330d]

Thank you all for the help. I will try the "Ediabas Standard Settings" with Enet-cable and use Ediabasconfigurator to connect to Enet.

Fingers crossed!

[330d]

@330d:
your edibas.ini is messed up.
Try the one attached.

Thank you, this worked!!