[rinaprasant]

Dear thanks for help
very sorry to say - in my car not a single problem in ecu
1] frist problem , esl [ elv ] not unlock , so car not start
2] customer parking manully unlock , esl borken & put in workshop
3] i made immo off with magicmotor sports edc17cp14 , car start all well
4] some error in dash like , stability , parking breake
5] customer go to dealer , dealer told me pll ulpoad orignal file in ecu
6] so i write orignal dump , immo active , dealer change new esl but not success to code
7] dealer given higer expense full set
8] again customer back to my office , i made immo off car working good

son in my mind may be wring or comfort module fault
i want to know after immo off , is that problem appear bcoz of anti thief siganle missing ?

thanks

[dustin]

Dear thanks for help
very sorry to say - in my car not a single problem in ecu
1] frist problem , esl [ elv ] not unlock , so car not start
2] customer parking manully unlock , esl borken & put in workshop
3] i made immo off with magicmotor sports edc17cp14 , car start all well
4] some error in dash like , stability , parking breake
5] customer go to dealer , dealer told me pll ulpoad orignal file in ecu
6] so i write orignal dump , immo active , dealer change new esl but not success to code
7] dealer given higer expense full set
8] again customer back to my office , i made immo off car working good

son in my mind may be wring or comfort module fault
i want to know after immo off , is that problem appear bcoz of anti thief siganle missing ?
thanks

I've had that problem where new ESL didnt work. CCM was corrupt. you could try cloning CCM 95320 or reflash CMM with Odis e.

[rinaprasant]

Thanks for reply
if i write another working dump of 95320 is working or must flash with odis-e

thanks

[dustin]

Thanks for reply
if i write another working dump of 95320 is working or must flash with odis-e

thanks

Normally on most CCM you can copy dump from 95320,but it has happened me where this didn't work. then i reflash original CCM.
I always do full scan with VCDS first and back up ABS long coding.

[rinaprasant]

Hello
i have orignal avdi , so if any one have sgo. file please help me

thanks

---

here i attach my dump is it correct or corrept

thanks

[dustin]

Hello
i have orignal avdi , so if any one have sgo. file please help me

thanks

---

here i attach my dump is it correct or corrept

thanks

whats the part number

[rinaprasant]

Hello
sorry for late reply
my part numer - vw ag 3C0 959 433 AR ,

THANKS

[rinaprasant]

Hello
please any one how to or what to do

thanks

[rinaprasant]

Hello
thanks for all of u for help me
i read other ccm from working car 95320 in cricuit with smelecom eeprom adaptor , write back to my ccm & make new key with dump with avdi
all working , stering angle sensor error

thanks

[dustin]

Hello
thanks for all of u for help me
i read other ccm from working car 95320 in cricuit with smelecom eeprom adaptor , write back to my ccm & make new key with dump with avdi
all working , stering angle sensor error

thanks

glad you're sorted