Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
CANbus monitor/logger
02-01-2018, 14:32 PM,
Post: #1
|
|||
|
|||
CANbus monitor/logger
Can anyone recommend CAN logging software that can be used with USB K+DCAN cable. Need to log some CAN messages for a quick check but at the moment I only have USB K+DCAN cable with FT232RL chip.
|
|||
02-01-2018, 14:49 PM,
Post: #2
|
|||
|
|||
RE: CANbus monitor/logger
|
|||
02-01-2018, 16:07 PM,
Post: #3
|
|||
|
|||
RE: CANbus monitor/logger
If you're using EDIABAS, you can set trace level to highest and look at the trace files.
|
|||
03-01-2018, 09:53 AM,
Post: #4
|
|||
|
|||
RE: CANbus monitor/logger
EDIABAS is OK. But I need live monitor so I can track the changes. Something simple, CAN Monitor, Kvaser CanKing, CANalyzer or similar which have drivers for USB K+DCAN with FT232 chip.
|
|||
03-01-2018, 09:57 AM,
(This post was last modified: 03-01-2018, 09:58 AM by inotherwords.)
Post: #5
|
|||
|
|||
RE: CANbus monitor/logger
(03-01-2018, 09:53 AM)14TLC Wrote: EDIABAS is OK. But I need live monitor so I can track the changes. Something simple, CAN Monitor, Kvaser CanKing, CANalyzer or similar which have drivers for USB K+DCAN with FT232 chip.I think you need COM-port sniffer for that. It should work with virtual port. Or buy standalone CAN-sniffer and connect it to K/D-CAN. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content