Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Question EVO+ATM
07-01-2018, 11:15 AM,
Post: #1
XZBMW  Question EVO+ATM
Hi guys, we need some advise from PRO's
Friend of mine retrofitting EVO to his E91. So far so good.
Now he get ATM modul.
So question is: can he somehow(soldering, etc...) connect antennas from his car to ATM module? And now EVO and ATM have differrent VINs. What is best solution? Change EVO VIN+FSC pack?
Thanks for any info.
And last thing sweating
His controller is connected to K-CAN4 on emulator. Controller works, but no answer from touchpad. It's coding related?
secretsecret
Quote this message in a reply
07-01-2018, 11:32 AM,
Post: #2
RE: Question EVO+ATM
The evo have a connector for antena?if yes,y dont kmow that wil work
Quote this message in a reply
07-01-2018, 12:19 PM,
Post: #3
RE: Question EVO+ATM
No, evo without GPS connector. HW version 3.1 model B240.
ATM modul part number 84102447787, ETK will not find it this number, VIN donor unknown.

Touchpad can bus connected direct to can bus EVO, not connected via car can. Controller works fine, but without touchpad. Touchpad in EVO menu enabled. Part number controller is 65826829082
Quote this message in a reply
07-01-2018, 18:56 PM,
Post: #4
RE: Question EVO+ATM
Do you have touch ecu installed too? If you only want atm for gps, I have one arm emulator for sale. Used it in my e60 with no gos evo id5 unit.
Quote this message in a reply
09-01-2018, 13:52 PM,
Post: #5
RE: Question EVO+ATM
Gentelmen, I have EVO retroffited, I'm using ATM emulator.

Now I want to go to the next step, I'm going to retrofit ATM-telematic module to have online and remote services available. Can anyone advice how can I do it?

Do I have to pull out SIM card from my TCB module, buy ATM module and install my simcard in it?

Any help will be much appreciated.
Quote this message in a reply
10-01-2018, 15:34 PM,
Post: #6
RE: Question EVO+ATM
(09-01-2018, 13:52 PM)pweber84 Wrote:  Gentelmen, I have EVO retroffited, I'm using ATM emulator.

Now I want to go to the next step, I'm going to retrofit ATM-telematic module to have online and remote services available. Can anyone advice how can I do it?

Do I have to pull out SIM card from my TCB module, buy ATM module and install my simcard in it?

Any help will be much appreciated.

This is a very complicated and advanced project and I recommend you contact someone professional who can do this. Or do extensive research.

Please, Press the Buttons [Image: postbit_thx.gif] and [Image: postbit_reputation.gif] if you feel that this post helped you!

Quote this message in a reply
11-02-2018, 14:45 PM, (This post was last modified: 11-02-2018, 15:23 PM by inspi1981.)
Post: #7
RE: Question EVO+ATM
OK, ATM module is installed. Ethernet connection via OABR between EVO and ATM and K-CAN between EVO, ATM and emulator. Now GPS works, but when You drive, sometimes jumps out off road. How can I connect to ATM with diagnostics tool to read out VIN? Do I need gateway?

And connection to HU keep disconnecting and connecting with 3 sec interval. Also visible, when I ping 169.254.199.99 connection
Quote this message in a reply
15-02-2018, 02:17 AM,
Post: #8
RE: Question EVO+ATM
(11-02-2018, 14:45 PM)inspi1981 Wrote:  OK, ATM module is installed. Ethernet connection via OABR between EVO and ATM and K-CAN between EVO, ATM and emulator. Now GPS works, but when You drive, sometimes jumps out off road. How can I connect to ATM with diagnostics tool to read out VIN? Do I need gateway?

And connection to HU keep disconnecting and connecting with 3 sec interval. Also visible, when I ping 169.254.199.99 connection

hi
did you manage to solve this?

if you feel that I have in some way contributed / helped solve your issues/problems/requests, please do not forget to press thanks or rep button. Much appreciated. 
under
Quote this message in a reply
15-02-2018, 08:33 AM,
Post: #9
RE: Question EVO+ATM
Turn off ignition and it stays up till the car sleeps.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [Question] Change X1 F48 gearbox jaramillo 9 1,366 24-03-2024, 21:27 PM
Last Post: masa52
XZBMW ISTA Version Question that4chanhacker 5 529 09-02-2024, 07:54 AM
Last Post: Node
XZBMW F22 Adaptive LED Retrofit HWEL Question bmw_coder_09 2 289 02-01-2024, 23:33 PM
Last Post: bmw_coder_09
  Converting G02 from US to ECE and EGS question Jack79 0 214 24-11-2023, 20:42 PM
Last Post: Jack79
XZBMW HU_NBT2 update question Prohibited_PL 3 387 14-11-2023, 17:51 PM
Last Post: grizzle
  Question regarding ICOM from Aliexpress clode777 15 1,580 06-11-2023, 16:38 PM
Last Post: johann74270
  Question about cas and keyless go key position budddyyy 6 336 05-11-2023, 19:02 PM
Last Post: budddyyy
  HU ID6 EVO maps update process - question Joe2 3 533 07-09-2023, 19:31 PM
Last Post: DEJMIEN
XZBMW [Question] ISTAD in Parallels MAC M1? ruben_17non 13 1,448 18-08-2023, 16:15 PM
Last Post: b3dn
XZBMW Question about g11 air suspension budddyyy 0 158 12-08-2023, 18:06 PM
Last Post: budddyyy

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content