[simonchs]

Hello, I’ve got problem when trying to VO code or flash the TBX ecu.

And the following log is result from VO code. Would anyone get idea on this error?

Thanks.

Code:

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

Read SVT before/after TAL execution is deactivated.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
MCDDiagService<id=84900, job=com.bmw.psdz.jobs.uds.MCD3_ReadFlashTimingParameters, service=RDBI_FTP - ReadDataByIdentifier FlashTimingParameter, description=error: timeout, link=TBX_35_ETHERNET> [DIAGSERVICE]
[] use default timing parameters as an exception occured [WARN]
[] - [Exception - TBX - 35] negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_FTP has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: TBX_35_ETHERNET
severity: ERROR

ExecutionID=2018/01/09-01:12:16.780
[] prepareTALExecution started [PROGRESS]
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.common.MCD3_PrepareTALExecution, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=TBX_35_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.common.MCD3_PrepareTALExecution, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=TBX_35_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=36900, job=com.bmw.psdz.jobs.common.MCD3_PrepareTALExecution, service=RDBI_ADS - ReadDataByIdentifier ActiveDiagnosticSession, description=error: timeout, link=TBX_35_ETHERNET> [DIAGSERVICE]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.uds.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=TBX_35_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.uds.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=TBX_35_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.uds.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=TBX_35_ETHERNET> [DIAGSERVICE]
[TBX - 35] There was an error during TAL execution, please check the log files. [WARN]
[TBX - 35] - [Exception - TBX - 35] negative response error:
code: TIMEOUT P2/T2 occurred
description: P2 timeout on Service RDBI_SVK has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: TBX_35_ETHERNET
severity: ERROR

[] null [THROWABLE]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "18s". [C206]
Abarbeitung beendet