Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ISTA-D 4.09.20 Standalone
17-01-2018, 20:16 PM,
Post: #21
RE: ISTA-D 4.09.20 Standalone
I am triying install to my friend laptop but have error ısta-d launcher
have an instruction for correct installition ??
Quote this message in a reply
17-01-2018, 20:24 PM,
Post: #22
RE: ISTA-D 4.09.20 Standalone
(17-01-2018, 20:16 PM)hero3838 Wrote:  I am triying install to my friend laptop but have error ısta-d launcher
have an instruction for correct installition ??

What error?


Quote this message in a reply
18-01-2018, 18:10 PM,
Post: #23
RE: ISTA-D 4.09.20 Standalone
Has something changed in this vs previous version? I'm getting: "the vehicle could not be identified. please check the access to the vehicle." I made a new clean install. INPA and ISTA-P work just fine on that laptop, but ISTA+ doesn't. I've checked the ediabas.ini in c:\Ediabas and in Rheingold\Ediabas.
Quote this message in a reply
18-01-2018, 20:22 PM,
Post: #24
RE: ISTA-D 4.09.20 Standalone
(18-01-2018, 18:10 PM)Spirit5676 Wrote:  Has something changed in this vs previous version? I'm getting: "the vehicle could not be identified. please check the access to the vehicle." I made a new clean install. INPA and ISTA-P work just fine on that laptop, but ISTA+ doesn't. I've checked the ediabas.ini in c:\Ediabas and in Rheingold\Ediabas.

I have the same issue today. Windows 10 Pro x64 has been recovered from the Acronis Backup, then installed again the whole application smile
Quote this message in a reply
19-01-2018, 03:07 AM, (This post was last modified: 19-01-2018, 03:12 AM by spider80.)
Post: #25
XZBMW  RE: ISTA-D 4.09.20 Standalone
(18-01-2018, 20:22 PM)ionutmaruta Wrote:  
(18-01-2018, 18:10 PM)Spirit5676 Wrote:  Has something changed in this vs previous version? I'm getting: "the vehicle could not be identified. please check the access to the vehicle." I made a new clean install. INPA and ISTA-P work just fine on that laptop, but ISTA+ doesn't. I've checked the ediabas.ini in c:\Ediabas and in Rheingold\Ediabas.

I have the same issue today. Windows 10 Pro x64 has been recovered from the Acronis Backup, then installed again the whole application smile

Something U both doing wrong. Check Your installation and settings by my FAQ.

Don't forget press [Image: 655659acbccb82153e5bf498005c5711.gif] and [Image: 462af960d0477dcae1d2fa68fa59686f.gif], if my post helped you.
Remote install/update of diagnostic software
[Image: b0d366e737125313340a6a2af955e60e.gif]
Quote this message in a reply
19-01-2018, 06:20 AM, (This post was last modified: 19-01-2018, 06:22 AM by Stromag.)
Post: #26
RE: ISTA-D 4.09.20 Standalone
Can you search for a vehicle via vin?
Quote this message in a reply
19-01-2018, 06:36 AM, (This post was last modified: 19-01-2018, 06:41 AM by spider80.)
Post: #27
XZBMW  RE: ISTA-D 4.09.20 Standalone
(19-01-2018, 06:20 AM)Stromag Wrote:  Can you search for a vehicle via vin?

Yes, all working.

[Image: 24af5626e12a2e1d9728e727fdbcaecd.jpeg]

Don't forget press [Image: 655659acbccb82153e5bf498005c5711.gif] and [Image: 462af960d0477dcae1d2fa68fa59686f.gif], if my post helped you.
Remote install/update of diagnostic software
[Image: b0d366e737125313340a6a2af955e60e.gif]
Quote this message in a reply
19-01-2018, 22:20 PM,
Post: #28
RE: ISTA-D 4.09.20 Standalone
(19-01-2018, 03:07 AM)spider80 Wrote:  
(18-01-2018, 20:22 PM)ionutmaruta Wrote:  
(18-01-2018, 18:10 PM)Spirit5676 Wrote:  Has something changed in this vs previous version? I'm getting: "the vehicle could not be identified. please check the access to the vehicle." I made a new clean install. INPA and ISTA-P work just fine on that laptop, but ISTA+ doesn't. I've checked the ediabas.ini in c:\Ediabas and in Rheingold\Ediabas.

I have the same issue today. Windows 10 Pro x64 has been recovered from the Acronis Backup, then installed again the whole application smile

Something U both doing wrong. Check Your installation and settings by my FAQ.

It seems so, because I restored my previous win10 and updated ISTA in that and it works as it used to. I want clean install because that version has some issues due to windows updates.

Clean win10 x64 pro install (format hdd before install)
Installed standard tools 2.12
jre-8u161-windows both (x86 and x64)
vcredist 2005-2017 (x86 and x64)
vs90_piaredist
net framework 3.5 including 3.0 and 2.0 an (win 10 x64 fall creators update comes with net framework 4.7 preinstalled, so can't install 4.5.2, 4.6.1, 4.6.2).
run ISTA-D Reg Fix x64

Since INPA works, I assume the drivers and com port are OK. ISTA VCI is set to Ediabas. Used 7zip 16.04 to unpack, unblocked archives before using 7zip. Anyone got any ideas what to check next?
Quote this message in a reply
19-01-2018, 22:51 PM, (This post was last modified: 20-01-2018, 08:01 AM by okolo.)
Post: #29
RE: ISTA-D 4.09.20 Standalone
(18-01-2018, 20:22 PM)ionutmaruta Wrote:  
(18-01-2018, 18:10 PM)Spirit5676 Wrote:  Has something changed in this vs previous version? I'm getting: "the vehicle could not be identified. please check the access to the vehicle." I made a new clean install. INPA and ISTA-P work just fine on that laptop, but ISTA+ doesn't. I've checked the ediabas.ini in c:\Ediabas and in Rheingold\Ediabas.

I have the same issue today. Windows 10 Pro x64 has been recovered from the Acronis Backup, then installed again the whole application smile


HI,

You need to change "ISTA-D Reg Fix" devil

The solution to this question was given mr. Stromag congrats

http://cartechnology.co.uk/showthread.ph...#pid311645

good luck
Reputation: +1 - Spirit5676 [+1]
Quote this message in a reply
[+] 4 users say Thank You to okolo for this post
20-01-2018, 00:18 AM, (This post was last modified: 20-01-2018, 00:27 AM by Spirit5676.)
Post: #30
RE: ISTA-D 4.09.20 Standalone
(19-01-2018, 22:51 PM)okolo Wrote:  
(18-01-2018, 20:22 PM)ionutmaruta Wrote:  
(18-01-2018, 18:10 PM)Spirit5676 Wrote:  Has something changed in this vs previous version? I'm getting: "the vehicle could not be identified. please check the access to the vehicle." I made a new clean install. INPA and ISTA-P work just fine on that laptop, but ISTA+ doesn't. I've checked the ediabas.ini in c:\Ediabas and in Rheingold\Ediabas.

I have the same issue today. Windows 10 Pro x64 has been recovered from the Acronis Backup, then installed again the whole application smile

(19-01-2018, 22:20 PM)Spirit5676 Wrote:  
(19-01-2018, 03:07 AM)spider80 Wrote:  
(18-01-2018, 20:22 PM)ionutmaruta Wrote:  
(18-01-2018, 18:10 PM)Spirit5676 Wrote:  Has something changed in this vs previous version? I'm getting: "the vehicle could not be identified. please check the access to the vehicle." I made a new clean install. INPA and ISTA-P work just fine on that laptop, but ISTA+ doesn't. I've checked the ediabas.ini in c:\Ediabas and in Rheingold\Ediabas.

I have the same issue today. Windows 10 Pro x64 has been recovered from the Acronis Backup, then installed again the whole application smile

Something U both doing wrong. Check Your installation and settings by my FAQ.

It seems so, because I restored my previous win10 and updated ISTA in that and it works as it used to. I want clean install because that version has some issues due to windows updates.

Clean win10 x64 pro install (format hdd before install)
Installed standard tools 2.12
jre-8u161-windows both (x86 and x64)
vcredist 2005-2017 (x86 and x64)
vs90_piaredist
net framework 3.5 including 3.0 and 2.0 an (win 10 x64 fall creators update comes with net framework 4.7 preinstalled, so can't install 4.5.2, 4.6.1, 4.6.2).
run ISTA-D Reg Fix x64

Since INPA works, I assume the drivers and com port are OK. ISTA VCI is set to Ediabas. Used 7zip 16.04 to unpack, unblocked archives before using 7zip. Anyone got any ideas what to check next?

HI,

You need to change "ISTA-D Reg Fix" devil

The solution to this question was given mr. Stromag congrats

http://cartechnology.co.uk/showthread.ph...#pid311645

good luck

You are correct, this was the solution. congrats. Now it's working.

spider80 you might want to include those two lines in the upcoming releases. In any case keep up the good work. yes

(13-01-2018, 10:42 AM)Stromag Wrote:  Open the Reg file with Notepad and add these 2 lines.

"LogisticBaseVersion" = "4.09.20" 
"SWIData" = "4.09.20" 

If someone gets the following error in ISTA+: “The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated”

The solution above will solve it.
Quote this message in a reply
[+] 2 users say Thank You to Spirit5676 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,649 627,780 40 minutes ago
Last Post: JPToadstool
  ista 4.46 Standalone kiranabc 33 3,059 11 hours ago
Last Post: Siki78
  ista for use whit vcx se db8000 0 41 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 363 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,363 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,480 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 127 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 167 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 669 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,512 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content