Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Kess Ktag

  4. MOD FILES

  5. ProCarDiag

  6. ECU CHIPS

  7. NBE Files



Post Reply 
BMW i3 programming ista-p do I need use extra power source?
12-01-2018, 10:58 AM
Post: #1
BMW i3 programming ista-p do I need use extra power source?
Hi guys,

I want to program i3, can it be done without extra power source? Does anyone knows procedure?
Thank you.
Find all posts by this user
Quote this message in a reply
12-01-2018, 12:16 PM
Post: #2
RE: BMW i3 programming ista-p do I need use extra power source?
Unplug HV Service disconnect and plug 12V charger on battery
Find all posts by this user
Quote this message in a reply
 Thanks given by: pweber84
12-01-2018, 14:39 PM
Post: #3
RE: BMW i3 programming ista-p do I need use extra power source?
I just connect the charger to the 12v battery.
Find all posts by this user
Quote this message in a reply
 Thanks given by: pweber84
12-01-2018, 16:45 PM
Post: #4
RE: BMW i3 programming ista-p do I need use extra power source?
(12-01-2018 14:39 PM)bawareca Wrote:  I just connect the charger to the 12v battery.

No need for unplugging HV -Battery...
Find all posts by this user
Quote this message in a reply
 Thanks given by: pweber84
12-01-2018, 17:56 PM
Post: #5
RE: BMW i3 programming ista-p do I need use extra power source?
Ok, so who has right? Do I need to unplug or not? Anyone programmed modules when HV was plugged?
Find all posts by this user
Quote this message in a reply
12-01-2018, 18:50 PM
Post: #6
RE: BMW i3 programming ista-p do I need use extra power source?
You should disable the hv using the service disconnect under the bonnet, confirm deactivation via check control message, then connect 12 power supply and program as normal.
Find all posts by this user
Quote this message in a reply
 Thanks given by: pweber84
12-01-2018, 22:04 PM
Post: #7
RE: BMW i3 programming ista-p do I need use extra power source?
Thanks, this hv connector is on the left side under the bonnet? Under plastic cover above headlight?

Can anyone tell me exactly where?
Find all posts by this user
Quote this message in a reply
13-01-2018, 03:10 AM (This post was last modified: 13-01-2018 03:13 AM by winter.)
Post: #8
RE: BMW i3 programming ista-p do I need use extra power source?
(12-01-2018 22:04 PM)pweber84 Wrote:  Thanks, this hv connector is on the left side under the bonnet? Under plastic cover above headlight?

Can anyone tell me exactly where?

Yes.service connector under the engine hood with orange color,please attention after lift up the connector then lock it with an "U" lock.and chech CC from instrument cluster.

Another attention is the charger must be connected to EME(luggage compartment,remove the cover) two low voltage poles not 12v battery under the engine hood.
Find all posts by this user
Quote this message in a reply
 Thanks given by: pweber84
13-01-2018, 05:51 AM
Post: #9
XZBMW RE: BMW i3 programming ista-p do I need use extra power source?
See attachment for pic


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
 Thanks given by: pweber84 , emhtuning
13-01-2018, 08:37 AM (This post was last modified: 13-01-2018 08:47 AM by Patrick11021979.)
Post: #10
RE: BMW i3 programming ista-p do I need use extra power source?
(12-01-2018 18:50 PM)tonemoz Wrote:  You should disable the hv using the service disconnect under the bonnet, confirm deactivation via check control message, then connect 12 power supply and program as normal.

It was used to disconnect HV-Battery, but by the latest methods by bmw it is not required anymore...

Little correction, if the I-Fase is before or is I001-14-03-504, than you have to disconnect HV- Battery, but if it has a newer I-Level it isn't needed anymore because Ista/p or Ista/d does do it automatically by programming....
Find all posts by this user
Quote this message in a reply
 Thanks given by: pweber84
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
XZBMW ISTA-D 4.09.20 Standalone in spider80 30 3,359 Today 04:44 AM
Last Post: spider80
XZBMW Rheingold 4.09.13 Standalone / SDP 4.09.12 / ISTA-P 3.63.2.001 Torrent in spider80 58 8,521 Yesterday 21:20 PM
Last Post: pete28
XZBMW ISTA-P (3.62.0.500 - 3.62.1.003) - Mega in shawnsheridan 36 6,385 Yesterday 04:33 AM
Last Post: cookiesowns
XZBMW ISTA-P 3.62.2.003 - Mega in shawnsheridan 31 4,384 Yesterday 04:29 AM
Last Post: shawnsheridan
XZBMW E-sys programming question in Qwerti 1 123 Yesterday 01:02 AM
Last Post: Almaretto
XZBMW ISTA fail afer NCS Expert install in StianGSi 3 172 18-01-2018 23:16 PM
Last Post: DNK76
  Standalone ista D 4.09.13 + P 3.63.2.001 ??? in ka_rai 6 234 18-01-2018 13:21 PM
Last Post: spider80
XZBMW ISTA 4.09.1X install files ( msi - xml - DE - EN - CZ - Global - SDP - BLP) in inspi1981 22 6,047 18-01-2018 06:25 AM
Last Post: snypertje
XZBMW Looking for French SQLiteDBs for Ista 4 in mecanicobmw 4 184 17-01-2018 16:00 PM
Last Post: mecanicobmw
XZBMW Searching ISTA 4.05.x or older in milkyway 3 174 16-01-2018 08:21 AM
Last Post: snypertje

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content