Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DTC Removal WinOLS - Newbie
|
12-01-2018, 13:32 PM,
Post: #1
|
|||
|
|||
DTC Removal WinOLS - Newbie
Hi all!!
Am new to the world of car tuning so i would like to start first of all from DTC removal. I currently have the Kessy v2 and then winOLS(i know it's a difficult software to use especially when you are newbie but am confident that I can make it). Is there any formula that i can use to detect where i can find specific check engine code in the winOLS in case i want to disable it? for example P2626. I would really appreciate it your help to my first steps into the world of tuning. |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
14-01-2018, 20:24 PM,
Post: #2
|
|||
|
|||
|
RE: DTC Removal WinOLS - Newbie
Search and watch on youtube, there a lot of WinOls movies.
Good luck! |
|||
|
|
|
15-01-2018, 21:26 PM,
Post: #3
|
|||
|
|||
|
RE: DTC Removal WinOLS - Newbie
.............I would really appreciate it your help to my first steps into the world of tuning. ............
Now is much easer then 10 yers ago ....good luck !!!!!!!!! FileService Stage 1-2-3
SwirlFlaps,EGR/DPF/NOX/DTC/TVA/ADBLUE/Lambda/Immo ALL OFF etc.. Licensed: WinOLS, (Damos map packs,translate)+ FRT files RESELLER EVC Master: Kess Ktag CMD Ecutek, HPTuners, bFlash SKYPE Zenter Performance WhatsApp +48 884 664 588 |
|||
|
|
16-01-2018, 05:42 AM,
Post: #4
|
|||
|
|||
RE: DTC Removal WinOLS - Newbie
(15-01-2018, 21:26 PM)zenter perforrmance Wrote: .............I would really appreciate it your help to my first steps into the world of tuning. ............ "Now is much easer then 10 yers ago ....good luck !!!!!!!!!"  Yes good words..I start this job with K line interface via rs232 only ..now all is easer then 10 years ago |
|||
|
|
|
16-01-2018, 08:13 AM,
Post: #5
|
|||
|
|||
|
RE: DTC Removal WinOLS - Newbie
Started with eprom programator and swaping chips
|
|||
|
|
|
16-01-2018, 18:08 PM,
Post: #6
|
|||
|
|||
|
RE: DTC Removal WinOLS - Newbie
|
|||
|
|
|
17-01-2018, 12:50 PM,
Post: #7
|
|||
|
|||
|
RE: DTC Removal WinOLS - Newbie
I tried to find tutorials for DTC off from edc16 but no luck.
Can anyone help me with a tutorial or a link of a guide? Thank you. |
|||
|
|
|
17-01-2018, 19:56 PM,
(This post was last modified: 17-01-2018, 19:58 PM by konstantin.)
Post: #8
|
|||
|
|||
|
RE: DTC Removal WinOLS - Newbie
If you want for vw edc16 search here for vag dtc remover
http://cartechnology.co.uk/showthread.ph...tc+remover |
|||
|
|
|
18-01-2018, 07:19 AM,
Post: #9
|
|||
|
|||
RE: DTC Removal WinOLS - Newbie
(17-01-2018, 19:56 PM)konstantin Wrote: If you want for vw edc16 search here for vag dtc remover Hi Konstantin. Thank you very much, I already downloaded the software before but I just want to learn how to do it manually using WinOLS. |
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Iveco_Daily_2011_Speed Limiter Removal | ioura | 3 | 60 |
15-04-2024, 16:32 PM Last Post: Stig33 |
|
| A4 b8 need stage 1 and stationary limiter removal | Hazerssmurf | 2 | 112 |
01-04-2024, 21:15 PM Last Post: gkogkolos |
|
| ECM Titanium 1.61 + WinOLS 4.51 (VMware) | carsoftcare | 0 | 138 |
31-03-2024, 09:52 AM Last Post: carsoftcare |
|
|
|
WinOls 4.51 VMWare Win 7 | mesrine_29 | 0 | 173 |
19-03-2024, 16:48 PM Last Post: mesrine_29 |
|
|
Winols checksum plugin OLS294 | AutoUnit | 1 | 187 |
10-03-2024, 19:54 PM Last Post: BmwMerc |
|
|
WinOLS 5.54 | CenturionM | 3 | 1,006 |
07-03-2024, 17:18 PM Last Post: wrp_199 |
|
MB Delphi CRD2.35 NO READ REMOVAL | Isooow | 2 | 206 |
07-02-2024, 22:17 PM Last Post: L4ykTuning |
| Mini MED17.2 Noread removal | alexturbo | 3 | 257 |
30-11-2023, 19:23 PM Last Post: wajda3 |
|
| LDV maxus speed limiter removal | misterixion | 0 | 200 |
15-10-2023, 13:09 PM Last Post: misterixion |
|
| Skoda citigo cng removal | Dash_Burner | 0 | 148 |
12-10-2023, 06:55 AM Last Post: Dash_Burner |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
