[ovi730]

With thanks to SVVAG2000 now the solution of 7.020 is complete
attached firmware of 7.020 ktag - no crp lock to cpu , SD image and necessary sd CID

[kar407]

Thinks for your work. but this version of ktag come without token. wy we need to repair?

[pica14]

It is internet secured?

[ovi730]

This is the 7.020 firmware and sd method

[ruben_17non]

This is the 7.020 firmware and sd method

Thanks for share.
This is valid for update ktag 6.070?

[garage_neo]

Are you going to share kess firmware/sd too? btw many thanks for sharing

[domelec]

This is the 7.020 firmware and sd method

Thanks for share.
This is valid for update ktag 6.070?

this can only update if the nxp is unlocked or replaced with a blank nxp
6.070 is crp3 protected

[ruben_17non]

This is the 7.020 firmware and sd method

Thanks for share.
This is valid for update ktag 6.070?

this can only update if the nxp is unlocked or replaced with a blank nxp
6.070 is crp3 protected

thanks for repply.
this method, for unlock crp3 will work, after this is possible flash 7.020 with jlink?

[domelec]

Yes if the trick works if not then replace nxp with new blank nxp and reflash with jlink

[ruben_17non]

Yes if the trick works if not then replace nxp with new blank nxp and reflash with jlink

Not work for me...
Just I order new nxp lpc in mouser.
I try flash with flash magic and ttl uart, because I not have jlink.


Sdcard, how write iso, what software is recommended?

Thanks.