Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Kess v2 clone y ktag no read edc17c19 opel
|
17-01-2018, 18:28 PM,
(This post was last modified: 17-01-2018, 23:51 PM by Clusters.)
Post: #1
|
|||
|
|||
|
Kess v2 clone y ktag no read edc17c19 opel
Hello colleagues I have kess v2 and I could read by obd edc17c19 opel to do dtc off but when recording file at the end of writing tells me that ecu protection and the car does not start again recorded original file and starts ok
but now I want to read by boot and kess v2 I can not and with ktag not any experience to read by boot ksuite 2.08 software thanks and regards |
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
17-01-2018, 18:41 PM,
Post: #2
|
|||
|
|||
|
RE: Kess v2 clone y ktag no read edc17c19 opel
If you have ktag is very easy to read it go ahead
|
|||
|
|
|
17-01-2018, 18:43 PM,
Post: #3
|
|||
|
|||
|
RE: Kess v2 clone y ktag no read edc17c19 opel
I can not read nor have I checked cables and nothing
|
|||
|
|
|
17-01-2018, 19:50 PM,
Post: #4
|
|||
|
|||
|
RE: Kess v2 clone y ktag no read edc17c19 opel
Firmware from ktag?
|
|||
|
|
|
17-01-2018, 20:28 PM,
Post: #5
|
|||
|
|||
|
RE: Kess v2 clone y ktag no read edc17c19 opel
Ktag 6.070......
|
|||
|
|
|
17-01-2018, 22:11 PM,
Post: #6
|
|||
|
|||
|
RE: Kess v2 clone y ktag no read edc17c19 opel
Two solutions try with fg if you have not this try boot read with kess but check pin outs from kess boot cable i think will read it
|
|||
|
|
|
17-01-2018, 22:27 PM,
Post: #7
|
|||
|
|||
|
RE: Kess v2 clone y ktag no read edc17c19 opel
In this direct way I can not read error ktag
Can I do it for BDM? |
|||
|
|
|
17-01-2018, 23:48 PM,
Post: #8
|
|||
|
|||
|
RE: Kess v2 clone y ktag no read edc17c19 opel
Solved thank......... 2.13 solved
|
|||
|
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
