Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ecu Not Respond But Works at 100%
17-01-2018, 21:43 PM,
Post: #1
|
|||
|
|||
Ecu Not Respond But Works at 100%
Yesterday I see for two times strange thing, before flash GTS DKG Firmware in F82, RDC missing in VCM but it's ok !
Pressure and temp detection are correct, no fault on Display, no change if ICOM or ENET, changing Pc, or software. Time ago in F11, same problem with iDrive Controller on CIC's Car, no present in VCM but works at 100% Has anyone seen this? I think that is a problem on ECU with KCAN1 Line, maybe a noise in line or Ecu isn't at 100%, both controller and RDC use same KCAN1 line BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
Reputation: +1 - BMWdriva [+1] | |||
18-01-2018, 05:49 AM,
Post: #2
|
|||
|
|||
RE: Ecu Not Respond But Works at 100%
Do you get different SVT when read VCM vs read ECU?
|
|||
18-01-2018, 06:49 AM,
Post: #3
|
|||
|
|||
RE: Ecu Not Respond But Works at 100%
(18-01-2018, 05:49 AM)Almaretto Wrote: Do you get different SVT when read VCM vs read ECU? Reading SVT Ecu is present, remain after VO Code BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content