[beemerboy88]

Hi everybody. i installed rheingold 3.53.13 step by step as it is described in the manual.
it works so far but the version of "data" (found under "administration" - "version" - "subsystem") shows only "R--".
can anybody help me?

run the reg fix

thanks beemerboy88. unfortunately the fix wasn't included in the package I downloaded. do you have a link for me?

Edit the one from 3.53.30 or update.

[JoeHallenbeck]

Hi everybody. i installed rheingold 3.53.13 step by step as it is described in the manual.
it works so far but the version of "data" (found under "administration" - "version" - "subsystem") shows only "R--".
can anybody help me?

run the reg fix

thanks beemerboy88. unfortunately the fix wasn't included in the package I downloaded. do you have a link for me?

Edit the one from 3.53.30 or update.

ok, I have edited the reg fix. Works perfectly now! thank you very much my friend.

[jasonwch]

I am new to this..Tested INPA is installed properly...Is this error normal? or I need to put the database file somewhere?

PS, just for diagnostic, no programming reuqired for me

[ntuner]

Operations report is blank, used to work before. Is there a setting to enable it ?

[jaramillo]

I am new to this..Tested INPA is installed properly...Is this error normal? or I need to put the database file somewhere?

PS, just for diagnostic, no programming reuqired for me

Once you download the sqldb you have to unblock the files in order to avoid this warning.

http://winaero.com/blog/how-to-unblock-f...indows-10/

[MCNEXO94]

I am new to this..Tested INPA is installed properly...Is this error normal? or I need to put the database file somewhere?

PS, just for diagnostic, no programming reuqired for me

I have same error to you , You have found solution ?

Thanks

[ionut.ciuca]

I have this error. If I push OK, ISTA close and if I push x all is ok.

[Almaretto]

I have this error. If I push OK, ISTA close and if I push x all is ok.

That is usually a inadequate hardware error. If you check logs, you can learn more. Choice is to use standalone version with hardware check removed or continue to click X and use software.

[amiralshoq]

Thank you , i will try it

[Y.H.]

For all with the following error "Failed to start ISTA. Please make sure your ISTA configuration is valid." and normal installation 3.53.13 (non standalone version):

Change both PUK lines in the file ISTAGUI.exe.config to false:

<add key="BMW.Rheingold.CoreFramework.PUKActive" value="false"/>
<add key="BMW.Rheingold.CoreFramework.PUKLoadSaveActive" value="false"/>


And install Microsoft Visual C++ 2013 Redistributable X86 and X86,
Windows 10 users have to install the Microsoft .NET Framework 4.6.



Hit Thanks and Reputation button if this post helped you.

How can I open ISTAGUI.exe.config and how to change?


*problem solved thank you