[jaramillo]

Hello,

Just a simple question:
How to determine which terminal do I have to buy based on a wiring diagram?
Im enclosing an image that Im triying to determine which connector should be used for the 3 cables in each side.

I understand that the numbers into the image 0.17-0.35 refers to the diameter of the cable, but I havent seen any information related to the terminal

Thanks in advance!

[dil6222]

Hello,

Just a simple question:
How to determine which terminal do I have to buy based on a wiring diagram?
Im enclosing an image that Im triying to determine which connector should be used for the 3 cables in each side.

I understand that the numbers into the image 0.17-0.35 refers to the diameter of the cable, but I havent seen any information related to the terminal

Thanks in advance!

Well it all depends on what connectors are on the two units you joining together look at the pins on both then you should be able to pick which ones you need as it doesn't show on that circuit diagram what connectors are used
Unless you don't have the units to look at?

[jaramillo]

Hello,

Just a simple question:
How to determine which terminal do I have to buy based on a wiring diagram?
Im enclosing an image that Im triying to determine which connector should be used for the 3 cables in each side.

I understand that the numbers into the image 0.17-0.35 refers to the diameter of the cable, but I havent seen any information related to the terminal

Thanks in advance!

Well it all depends on what connectors are on the two units you joining together look at the pins on both then you should be able to pick which ones you need as it doesn't show on that circuit diagram what connectors are used
Unless you don't have the units to look at?

Thanks for your reply.
I dont have the unit to look at. Thats the main problem,
Is there any place where I could look at?

[dil6222]

Hello,

Just a simple question:
How to determine which terminal do I have to buy based on a wiring diagram?
Im enclosing an image that Im triying to determine which connector should be used for the 3 cables in each side.

I understand that the numbers into the image 0.17-0.35 refers to the diameter of the cable, but I havent seen any information related to the terminal

Thanks in advance!

Well it all depends on what connectors are on the two units you joining together look at the pins on both then you should be able to pick which ones you need as it doesn't show on that circuit diagram what connectors are used
Unless you don't have the units to look at?

Thanks for your reply.
I dont have the unit to look at. Thats the main problem,
Is there any place where I could look at?

If you know what the units are try find some pictures on google then you might be lucky enough to be able to find clear enough picture to look at pins that's all I can suggest.

What car are the units for and what year ?

[tonemoz]

Epc usually lists the correct pins and connectors for many components.

[SweetBMW]

If you press the Connector name A42*1B for example the part number for socket and pins is in the picture. Not always. But Østen.

[bryosb]

Look unit up in ETK, right click on part number, will list connectors and terminals most of the time