[diffparty]

I need help to stop peugeot 307 odometer 159,000 km leave the current reading below

[23Andi23]

I need help to stop peugeot 307 odometer 159,000 km leave the current reading below

Try this

[diffparty]

Good file I have left I put in the box and read it to check it tells me not found mileage

[vaidisvaidis]

You need to put some info what year,what bsi make,eeprom nr,thanks

[diffparty]

The car's peugeot 307 bsi valeo sangem odometer,

[vaidisvaidis]

Hi,what type eeprom you have in dash

[diffparty]

I see on board EEPROM only thing I see is an mcu samgem photo I let the board if my machine is guiding me evil and also bsi

---

I see on board EEPROM only thing I see is an mcu samgem photo I let the board if my machine is guiding me evil and also bsi

[vaidisvaidis]

Dash manufacturer is Sagem, BSI is made by Valeo
0670: xx xx xx xx xx xx xx xx FF F0 AD CF xx xx FF F0
0680: AD CF xx xx FF F0 AD CF xx xx FF F0 AD CF xx xx
0690: FF F0 AD CF xx xx FF F0 AD CF xx xx FF F0 AD CF
06A0: xx xx FF F0 AD CF xx xx xx xx xx xx xx xx xx xx
where the next bytes:
FF F0 AD CF - is a mileage

Instruction: read the 68HC912DG128 chip from the BSI (Valeo), and
edit the mileage as shown here. Then connect dash to the connectors .
on the car WITHOUT the BSI. Put the key to the ignition, but do not start!!!
just power on the dash. Dash value will self deletes.
After this connect the BSI and km value will be automatically loaded from BSI to dash. is that any good,but can write what year car,what type eeprom numbers you have in dash

[diffparty]

The number of board eeprom is:
L4949
xbxxd

[vaidisvaidis]

You need only change mileage in bsi after folow Instruction: read the 68HC912DG128 chip from the BSI (Valeo), and
edit the mileage as shown here. Then connect dash to the connectors .
on the car WITHOUT the BSI. Put the key to the ignition, but do not start!!!
just power on the dash. Dash value will self deletes.
After this connect the BSI and km value will be automatically loaded from BSI to dash