[ombra]

Hi
first at least push thanks and reputation buttons for members who helped you
i don't want to be rood .


aroundlocks is right except few important details

i have the shematic how to connect to upa to this ecu and where is the location of mcu
but what tool do you have to make key ?
because not all key maker have this solution and it is not cheap

you need to read and write flash after make transponder
regards

Ok,
I'v got original upa and tango I don't know if it is enough first time I got this honda ecu .

here is an eeprom but I do not remember how it is classified, if you want more details the ZEDBULL software can give you a hand

[raffy haddad]

Hi
As i know tango don’t support this ecu
I might be wrong
Maybe members here who own tango can confirm or deny
Personaly i don’t own tango
Regards

---

Hi
first at least push thanks and reputation buttons for members who helped you
i don't want to be rood .


aroundlocks is right except few important details

i have the shematic how to connect to upa to this ecu and where is the location of mcu
but what tool do you have to make key ?
because not all key maker have this solution and it is not cheap

you need to read and write flash after make transponder
regards

Ok,
I'v got original upa and tango I don't know if it is enough first time I got this honda ecu .

here is an eeprom but I do not remember how it is classified, if you want more details the ZEDBULL software can give you a hand

Hi this ecu don’t have external eeprom
I might also be wrong
This ecu has mcu must read flash to get to make transponder
But it will not hurt if post author try to find eeprom as you
Show it
Regards

[amorin25]

Hi
first at least push thanks and reputation buttons for members who helped you
i don't want to be rood .


aroundlocks is right except few important details

i have the shematic how to connect to upa to this ecu and where is the location of mcu
but what tool do you have to make key ?
because not all key maker have this solution and it is not cheap

you need to read and write flash after make transponder
regards

Ok,
I'v got original upa and tango I don't know if it is enough first time I got this honda ecu .

here is an eeprom but I do not remember how it is classified, if you want more details the ZEDBULL software can give you a hand

I knew the eeprom location from the other side .
I will open in this location to see .

[raffy haddad]

Hello
Can you post a picture for the backside of ecu just to be sure

Tomorrow morning i post you a picture
Regards

[amorin25]

Hello
Can you post a picture for the backside of ecu just to be sure

Tomorrow morning i post you a picture
Regards

Herer is the picture.

[raffy haddad]

Hello
Can you post a picture for the backside of ecu just to be sure

Tomorrow morning i post you a picture
Regards

Herer is the picture.

hi amorin25
please send me by pm your email
regards

[AROUNDLOCKS]

Hi
if eeprom not in position as raffy said check here as on left side of cdi
chip is freescale
copy and paste this link in google and you will see what i mean
this is someone elses post off this very site https://cartechnology.co.uk/attachment.php?aid=34974
so all thanks should go to him
his cdi is the exact same as yours by the look of it
hope this helps
regards
aroundlocks

[raffy haddad]

Hi
if eeprom not in position as raffy said check here as on left side of cdi
chip is freescale
copy and paste this link in google and you will see what i mean
this is someone elses post off this very site https://cartechnology.co.uk/attachment.php?aid=34974
so all thanks should go to him
his cdi is the exact same as yours by the look of it
hope this helps
regards
aroundlocks

Hi aroundlocks
Your right it is freescale but what type ?
And this picture is only show the mcu
And ofcourse thanks to him for his effort

If amorin found this mcu how will read it ?
My infos will tell him how to connect it and read it
Ithe big credit is for the solution finder on this ecu
Of course you pay lot for his solution but he makes job easy
Regards

Edit : i wanna make an appology for whom tried here to help and i am very sorry
The author of the solution warned me
If i publish the aolution he will never support me anymore
And to be honnest i need his always support

I didn’t know that he is member here into different name
Regards and sorry amorin25
I will delete the rar attachement