Possibly Related Threads…

***macako*** · (This post was last modified: 03-03-2018, 23:47 PM by Clusters.)

Hi, I have a problem with the BMW X5 3.0 EDC16CP35, after the return of the kess v2 clone, the car does not start. report the next error (picture) . I have already made a BDM backup, it also displays the same error when I return the backup . every help is welcome. I want to ask if the virgine file will solve the problem?

***asto*** · (This post was last modified: 01-03-2018, 22:19 PM by asto.)

(01-03-2018, 17:56 PM)macako Wrote: Hi, I have a problem with the BMW X5 3.0 EDC16CP35, after the return of the kess v2 clone, the car does not start. report the next error (picture) . I have already made a BDM backup, it also displays the same error when I return the backup . every help is welcome. I want to ask if the virgine file will solve the problem?

Hi macako
make backup in kess?if yes try write restore backup file again?i think not write u corected chcksm

BR asto

***danny677*** · 01-03-2018, 22:33 PM,

1 - Connect INPA
2 - Open Inpa
3 - Turn on the panel
4 - Select Engine
5 - Choose the type of engine
6 - Select the option: activate
7 - Select the option: EWS
8 - Select the option: reset ----> in progress ----> click ok
9 - Return to the first menu and close INPA.
10 - Switch off the ignition and remove the OBD cable to start the car.

***macako*** · 02-03-2018, 06:39 AM,

(01-03-2018, 22:18 PM)asto Wrote:
(01-03-2018, 17:56 PM)macako Wrote: Hi, I have a problem with the BMW X5 3.0 EDC16CP35, after the return of the kess v2 clone, the car does not start. report the next error (picture) . I have already made a BDM backup, it also displays the same error when I return the backup . every help is welcome. I want to ask if the virgine file will solve the problem?

Hi macako
make backup in kess?if yes try write restore backup file again?i think not write u corected chcksm

BR asto

Hi asto
Normally, I did backup with KTAG. Just for information I returned backup several times and again the same error

***macako*** · (This post was last modified: 02-03-2018, 23:03 PM by macako.)

Hello, Today I first tried to synchronize CAS module with Delphi but it was impossible then I tried with ISTA (china) the same and with it I had an unsuccessful attempt, in the end I have to try with original diagnosis from BMW (at BMW service), but it was unsuccessfully. With diagnostics all activations are made to eventually give us a notification that "CAS module defect". After all these attempts I have no idea what to do next.
As another way you can synchronize the CAS module ?

***macako*** · 03-03-2018, 23:11 PM,

Solved, extracted outside CAS module and adapted

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	BMW MSV70 pad SW during flashing	LMartin	8	307	20-03-2024, 09:10 AM Last Post: MahoJohn
	Solved ✔ Nissan Quashqai 2.0d eprom corrupt no start	dieselfuel	10	5,083	06-02-2024, 08:06 AM Last Post: mdwhere24
	BMW e65 3.0d no communication and car don't start	Gabriel87	1	187	11-01-2024, 19:18 PM Last Post: TKservice
	toyota edc17c73 B2799 after flashing	marcinmik	4	317	08-01-2024, 07:20 AM Last Post: marcinmik
	Qashqai EDC16CP33 Corrupt while OBD WRITE / Doesnt start P1611 P1612 Injectors IMMO	kenbobo	2	245	22-12-2023, 13:55 PM Last Post: kenbobo
	Crank but no start	David.D	11	658	08-11-2023, 20:37 PM Last Post: ____ANGEL___
	MB Sprinter W902 Start Error after dead Battery	chrisi1909	1	231	28-10-2023, 17:22 PM Last Post: Gabriel87
	Renault captur wont start	galisdoo	5	761	10-10-2023, 05:27 AM Last Post: raffy haddad
	Solved ✔ Kia Sportage no start after eeprom mode	Arczi26	4	408	20-09-2023, 09:38 AM Last Post: Arczi26
	renault clio hazard lights flashing after accident	diag2car	3	418	03-08-2023, 08:10 AM Last Post: liviu2004

Contact Us