Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bmw e92
04-04-2014, 16:23 PM,
Post: #1
|
|||
|
|||
Bmw e92
Hello,
I'm new in this forum and my english is not really good, i'm from france I have a Bmw e 92 and i change my break and reset the computer. Now i have an error on it. do u know where that could come ? cheers Thibaut |
|||
04-04-2014, 18:29 PM,
Post: #2
|
|||
|
|||
RE: Bmw e92
Specifically
in which the module was changed, that changed and what a mistake? |
|||
03-06-2015, 20:18 PM,
(This post was last modified: 03-06-2015, 20:18 PM by Ponach.)
Post: #3
|
|||
|
|||
RE: Bmw e92
Hello,
Did you change brake "clips". You must change them. Regards, |
|||
04-06-2015, 01:11 AM,
(This post was last modified: 04-06-2015, 02:31 AM by Mrg0721.)
Post: #4
|
|||
|
|||
RE: Bmw e92
Ponach has got it, but by clips i think he means SENSORS, brake pad wear sensors to be exact. My e90 has the front sensor in the left front and the rear in the right rear... These are a must if you are changing your brakes. Once you get the warning to change your pads, the sensors, have worn down just like the pads, have been triggered and that warning/error you now have will only reset itself with new sensors. News pads = new sensors
Not sure where you are located but where i live they run about $17 for oem bmw. No aftermarket cr*p! |
|||
04-06-2015, 21:58 PM,
Post: #5
|
|||
|
|||
RE: Bmw e92
What is the error you are getting?
Yes as the previous two replies pointed out you need to change the sensors in the Front left and Rear right when you do the brake job. Possibly the error is related to that. (04-04-2014, 16:23 PM)titi64000 Wrote: Hello, |
|||
16-07-2015, 10:37 AM,
Post: #6
|
|||
|
|||
RE: Bmw e92
Also the wire routes from the sensors further to the car can be broken.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content