Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Zgw after initialisation no communication with 4 modules
23-05-2018, 20:04 PM,
(This post was last modified: 23-05-2018, 21:17 PM by Fx82.)
Post: #1
|
|||
|
|||
zgw after initialisation no communication with 4 modules
After installing a new zgw from the dealer. I need to write VO to the new zgw.
How can I do this with e-sys? Did it a long time ago but I forgot how I did this. It was in expert mode and then VCM I believe. Edit: After initialisation I can't communicate with dme, szl, icm and eps. It gives an error that flexray failed. If I open manually all ports then there is a communication but after 5 seconds it closes all ports. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
23-05-2018, 20:31 PM,
Post: #2
|
|||
|
|||
RE: How to write VO to new zgw module
Expert Mode
VCM Load FA Write FA to FP i think that is |
|||
23-05-2018, 20:43 PM,
(This post was last modified: 23-05-2018, 21:02 PM by Fx82.)
Post: #3
|
|||
|
|||
RE: How to write VO to new zgw module
Yep just found it.
After initialisation I can't communicate with dme, szl, icm and eps. It gives an error that flexray failed. If I open manually all ports then there is a communication but after 5 seconds it closes all ports. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
23-05-2018, 21:30 PM,
Post: #4
|
|||
|
|||
RE: Zgw after initialisation no communication with 4 modules
did you try flash the zgw ?
|
|||
23-05-2018, 21:36 PM,
(This post was last modified: 23-05-2018, 21:44 PM by Fx82.)
Post: #5
|
|||
|
|||
RE: Zgw after initialisation no communication with 4 modules
No it already has the latest software from BMW.
Do you know how to flash this with e-sys? I'll upload some pictures tomorrow. MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
23-05-2018, 22:14 PM,
Post: #6
|
|||
|
|||
RE: Zgw after initialisation no communication with 4 modules
|
|||
31-05-2018, 13:34 PM,
Post: #7
|
|||
|
|||
RE: Zgw after initialisation no communication with 4 modules
Upload actual svt and fa I can generate a tal for you.
|
|||
07-07-2018, 15:56 PM,
Post: #8
|
|||
|
|||
RE: Zgw after initialisation no communication with 4 modules
To report back it appears that the new zgw from the dealer was defective. Replaced that one and everything works again.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content