Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ Ford Fiesta 2001 lost all keys
01-06-2018, 17:03 PM,
(This post was last modified: 03-06-2018, 13:39 PM by Clusters.)
Post: #1
|
|||
|
|||
Ford Fiesta 2001 lost all keys
Hi guys!
I have Ford Fiesta 2001 with lost all keys.I have a third key but without transponder.So I cant start the car.I was trying to programm the new (not original)key but unsuccesfully.I was trying with Forscan,Focom and Truecode cable but no luck.I contacted Chris from Keyprogrammers and he told me that in my situation the controler in PCM is unable to generate incode to succesfully add new key. Is there any chance for me Thanks in advance for your replies Jure |
|||
01-06-2018, 17:11 PM,
Post: #2
|
|||
|
|||
RE: Ford Fiesta 2001 lost all keys
(01-06-2018, 17:03 PM)jure5j Wrote: Hi guys!if its >2001 model it does not use incode also, you should only need 1 key but 2 transponders i used to do a lot of these years ago when i was young! |
|||
01-06-2018, 17:44 PM,
Post: #3
|
|||
|
|||
RE: Ford Fiesta 2001 lost all keys
Hi!
The car is 2001.In Forscan I cant add new key because it asks me for outcode.When I generate the incode the software pops up after a few seconds - wrong code. When I used Truecode it says error retrieving code.At keyprogrammers said that if you like to add a new key You dont need working key but if you want to erase old keys and add new than you need two new transponders.I have two new transponders. |
|||
03-06-2018, 07:42 AM,
(This post was last modified: 03-06-2018, 07:43 AM by jure5j.)
Post: #4
|
|||
|
|||
RE: Ford Fiesta 2001 lost all keys
|
|||
07-06-2018, 15:43 PM,
Post: #5
|
|||
|
|||
RE: Ford Fiesta 2001 lost all keys
|
|||
08-06-2018, 18:16 PM,
Post: #6
|
|||
|
|||
RE: Ford Fiesta 2001 lost all keys
(07-06-2018, 15:43 PM)bmwcare Wrote:Launch did the job.(03-06-2018, 07:42 AM)jure5j Wrote: Problem solved. There are 2 types of secure access: coded and timed. Coded requires an incode generation by the outcode provided by vehicle. Timed access requires that operator has wait for some period of time (usually 10 minutes) with diagnostic tester connected. Some vehicles support only coded access, some only timed access, some support both.For me it worked with timed access. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content