[raffy haddad]

hello
first the last key data you post are in immobox file
second you need to synchronise immobox and ecu
i will post ecu dump ra57 put that file in ecu eeprom and try start car with the last transponder that you post data
regards

[yudon]

I just can not understand how " last key data you post" appeared in the immo box dump. I did not write it compulsorily with the help of Carprog.
Perhaps in the beginning I experimented with teaching keys and brings it to the amplifier in car
I'll try to write RA57, and I will report about result.
Thank you!

[yudon]

Unfortunately solution did not work. Maybe you know how to do full immo off?

[raffy haddad]

Search for immo ecu toyota synchronisation
By bridging pin 4 and pin 13 on obd2 socket and try it

[yudon]

I understand, tomorrow I'll try.

[yudon]

Search for immo ecu toyota synchronisation
By bridging pin 4 and pin 13 on obd2 socket and try it

This morning I bridged the two pins and leave them for 30 minutes. When I turn on the ignition, the immobilizer indicator flashes 2 short and 1 long. It seems that did not work
But the contents of 93lс66 and RA57 changed. Please take a look at them. Thank you!

[raffy haddad]

Search for immo ecu toyota synchronisation
By bridging pin 4 and pin 13 on obd2 socket and try it

This morning I bridged the two pins and leave them for 30 minutes. When I turn on the ignition, the immobilizer indicator flashes 2 short and 1 long. It seems that did not work
But the contents of 93lс66 and RA57 changed. Please take a look at them. Thank you!

hello try this file changed key position
good luck

[yudon]

Thanks! I will try and report.
Do I need to do immo ecu synchronisation for 30 min?

[raffy haddad]

Hi first try without if car not star try synchronise

When you put key in ignition turn on for ep sec then try start
Good luck