[Dash_Burner]

I have Fiat km tool but i cant use it to correct milleage in fiat grande punto cars. I tested it on fiat panda and working fine so its not a usb driver problem.but i dont know why it doesnt work in grande punto..Does anyone has the same problem?

[darek_naprawa]

Apply adapter or hook up cables.

[Dash_Burner]

Apply adapter or hook up cables.

Did you have the same problem ? Is that solution working ?
As i see it is from carprog manual and not for fiat km tool.
I have many Grande Puntos to fix cause i am working at a rent a car company and i dont want to make any damage to the cars.

[darek_naprawa]

In some works, in others you need to program memory.

[Dash_Burner]

In some works, in others you need to program memory.

I will try it and post results. Even newest digiprog updates can not do this car so i will be happy if your solution works. Thanks for the momment

[Dash_Burner]

Apply adapter or hook up cables.

this solution doesnt work for grande punto
I see that when i use digiprog 3 and connect to this car using fiat 500 section from dp3 it connects and shows the right kilometers but when i try to put new value digiprog says ''check writen value'' and shows the value i put with a zero at the end.Example :
Instrument has 75000 kilometers,
i put 35000 kilometers from dp3
digiprog says check ''writen value 350000''
and instrument does not change value.

[darek_naprawa]

Not all will go to the obd2, some need to dismantle and rewrite the memory.

[Dash_Burner]

Not all will go to the obd2, some need to dismantle and rewrite the memory.

This is the way i fix this car since now. I buy fiat km tool interface to fix the car without removing cluster ...

[darek_naprawa]

Fiat km nor does all the grande punto.

[instinktus]

Never had problems with grande punto using original smok fiat km tool.
works ok.