[spider-wifi]

Hi,

My PCB od Aliance

I look that not includes chokes or jumpers. There will not be any problems?

BR

[zeca]

Hi
Anyone know if probe clip 92.... work with nissan consult3 plus ?
thank you

[mattydr67]

No
Only with Consult 3 ( not Consul 3 Plus )
Good luck

[titoun]

Hi,

My PCB od Aliance

I look that not includes chokes or jumpers. There will not be any problems?

BR

Hi,

No problem of functionally because you have strap by 0 ohm resistors here:



Regards

[obdstart]

Some have solutions for chinese clones for repair USB port (lost or wrong clip drivers) without change USB chip ?

[titoun]

Some have solutions for chinese clones for repair USB port (lost or wrong clip drivers) without change USB chip ?

Hi obdstart,

What is exactly your problem ? Differents solutions for differents problems on USB ...

Regards

[TizWoz]

Till Now I've tried it in Car Thalia 2006 and diagnosis ok, But I tried it in old Cars Like megane 2002 and R19 2002 and doesn,'t work.

In the device manager Just Show Me x2 usb devices...the installed drivers are:
JCAE CAN APRES RENUMERATION
JCAE ISO APRES RENUMERATION

while those that aren't installed are:
JCAE CAN AVANT RENUMERATION
JCAE ISO AVANT RENUMERATION

I don't know why those ones aren't detected

May be the New versions of clip Modified the Firmware in Module and now just work on that way?
Could you Connect your sonde to another pc(that never has had clip or its drivers) and let me know how is the interface recognized?

thanks partners

P.d: I've googled about the trouble and I'm not the only one with that problem, Please have a look on this link, some one with same problem and may be he Explain a littler bit cleared than me, please have a look on link LINK

try old version before 129 and use default drivers .

[obdstart]

Some have solutions for chinese clones for repair USB port (lost or wrong clip drivers) without change USB chip ?

Hi obdstart,

What is exactly your problem ? Differents solutions for differents problems on USB ...

Regards

HI m8
Come to me clip interface with wrong programed usb port. Some idiot try to use UD Fixer by xoom (for VAG) for FTDI chip, now in device manager interface see as device "UD Fixer by xoom" and light on: batery red, usb red and CAN green LED. light off are ISO green LED.

[titoun]

Some have solutions for chinese clones for repair USB port (lost or wrong clip drivers) without change USB chip ?

Hi obdstart,

What is exactly your problem ? Differents solutions for differents problems on USB ...

Regards

HI m8
Come to me clip interface with wrong programed usb port. Some idiot try to use UD Fixer by xoom (for VAG) for FTDI chip, now in device manager interface see as device "UD Fixer by xoom" and light on: batery red, usb red and CAN green LED. light off are ISO green LED.

Your probe is an RLT2002 or 926573 ???

If it's 926573 reference, you have a PDIUSBD12 (USB peripheral controller with parallel bus) !

Regards

[obdstart]

Some have solutions for chinese clones for repair USB port (lost or wrong clip drivers) without change USB chip ?

Hi obdstart,

What is exactly your problem ? Differents solutions for differents problems on USB ...

Regards

HI m8
Come to me clip interface with wrong programed usb port. Some idiot try to use UD Fixer by xoom (for VAG) for FTDI chip, now in device manager interface see as device "UD Fixer by xoom" and light on: batery red, usb red and CAN green LED. light off are ISO green LED.

Your probe is an RLT2002 or 926573 ???

If it's 926573 reference, you have a PDIUSBD12 (USB peripheral controller with parallel bus) !

Regards

Its 926573 reference. VID 079B & PID 001B.
No, I repeat: in Device Manager/Universal Serial Bus Controllers/ windows see as:"UD Fixer by xoom"