Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW F10 6WA KOMBI dead after flash
31-08-2018, 10:51 AM,
Post: #11
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
Now Kombi is woring fine, but i have next problem, lane change warning gives error...
|
|||
14-09-2018, 08:47 AM,
Post: #12
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
hi, I have two 6WA kombi coming from X6 F16, after reset eeprom (as always done successfully) I have a problem, I can not inject the CAF despite I have the latest version of psdzdata
I tried to flash but I always get errors and interruption of the process, despite trying different FAs! it's as if the original caf was not public .. " swfl_000003c1-006_023_014 " has anyone encountered the same problem? maybe you have to manipulate the SVT without starting the flash? it's as if he did not find the starting point ... |
|||
14-09-2018, 11:41 AM,
Post: #13
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
Try flashing the whole thing again.
|
|||
14-09-2018, 14:02 PM,
Post: #14
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
(14-09-2018, 08:47 AM)smercki Wrote: hi, I have two 6WA kombi coming from X6 F16, after reset eeprom (as always done successfully) I have a problem, I can not inject the CAF despite I have the latest version of psdzdata your cluster is steel shown as KOMBI in esys...try update VCM after modify fa and try again |
|||
14-09-2018, 14:56 PM,
Post: #15
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
(14-09-2018, 14:02 PM)rs@chip Wrote:(14-09-2018, 08:47 AM)smercki Wrote: hi, I have two 6WA kombi coming from X6 F16, after reset eeprom (as always done successfully) I have a problem, I can not inject the CAF despite I have the latest version of psdzdata I also tried this road but without luck ... tried several times to update but after a few minutes of error without even leaving, I am aware of ideas |
|||
14-09-2018, 15:10 PM,
(This post was last modified: 14-09-2018, 15:19 PM by hojo29.)
Post: #16
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
In which F series should this instrument cluster be installed?
BMW F10 and new instrument cluster from F16? |
|||
15-09-2018, 10:08 AM,
Post: #17
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
|
|||
15-09-2018, 13:48 PM,
Post: #18
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
KIS error comes because the instrument cluster is not from F10.
If so, then the FA needs to be adjusted and re-flashed. So that it recognizes ESYS correctly in the F10. |
|||
17-09-2018, 07:38 AM,
Post: #19
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
|
|||
17-09-2018, 09:04 AM,
(This post was last modified: 17-09-2018, 09:05 AM by artek_was.)
Post: #20
|
|||
|
|||
RE: BMW F10 6WA KOMBI dead after flash
Have you changed vin manually, or reset ? You have wrong eprom, not flash.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content