[gagagelashvili]

hi i got that error in the picture while i am updating the EGS 
any one know how to fix that

that's all you need

Rule 3: Do not Post Links on the Board! External links to files must be attached in a notepad file.

Thanks, Admin

Like this 

[rana]

[quote="rana" pid='375743' dateline='1538111440']
hi i got that error in the picture while i am updating the EGS 
any one know how to fix that

that's all you need


all that fine and i find the Number but when i start programming i got that Error

[willisodhiambo]

Ditch the DCAN, Last time it failed me big time. Used an ICOM and was a breeze!!

If ICOM fails in comfort, try expert mode.

---

Send me vin I get you the correct ZUSB.

Or use ISTAP and obtain measures plan. Check what ZUSB ISTAP recommends then use that to update.

hi, im searching for my origal zusb from my egs 535i e39 1998, can you help me?

part number 1423416

We can only work that out with your vin. Post it. Several ZUSBs match the hardware 1423416. Why do you need original ZUSB anyway? Are you able to read current ZUSB? Makes it easier tracing backwards.

[gagagelashvili]

[quote="rana" pid='375743' dateline='1538111440']
hi i got that error in the picture while i am updating the EGS 
any one know how to fix that

that's all you need


all that fine and i find the Number but when i start programming i got that Error

you need this file hwnr.da2 where this number is 7586761 you can either register it yourself or rewrite the file which I remember is in my distribution, if not, then I will add it in one hour

[gagagelashvili]

I looked at this number in my file, just rewrite hwnr.da2 in your directory EC-Apps\NFS\DATA\konv.tmp\HWNR.DA2

[rana]

..............00000

[rana]

done fine all work

[Nightrider_67]

can someone please share his hwnr.da2 file? i have same problem with jbbf3.